It has been said that all changes, even the most longed for, have their melancholy. This sentiment is certainly the case with Studebaker, whose last years of life were a whirlwind of success and failure.
In 1966 Studebaker – America’s oldest transportation company – closed its remaining automobile plant and exited the car business. The most bewildering thing of all is how quickly the company fell apart. After all, this was no insignificant startup company – Studebaker was more than a century old and once was America’s largest independent automaker. The company was in business a full 50 years before it produced its first automobile in 1902. At Studebaker’s 100th anniversary in 1952 it lagged just behind the Big Three. Just 11 years later, its huge manufacturing complex in South Bend, Ind., closed for good.
The post-WWII era had started out well. Studebaker was the first company to introduce an all-new postwar model in 1946, management believing the company “stood to gain much from being the first to give its customers the advantage of advancements both in design and production.” The advanced styling of Studebaker’s new envelope-body cars was impressive, with fenders integrated into the design rather than looking added on. Buyers waited in line for a glimpse.
The company soon built a reputation for styling. The 1950 Studebaker introduced controversial frontal styling with rounded fenders flanking a bullet-nose. Some thought it was the look of the future, others hated it, but it was very successful. In 1951 the company brought out a new V8 engine years before Nash, Hudson, Packard and even Pontiac.
Then came Studebaker’s centennial in 1952, a yearlong celebration for the company. There was much to be proud of. Studebaker was one of the largest automakers in the world and the future looked bright. The 1952 cars were face-lifted by Raymond Loewy’s designers, featuring a sloping hood and low-set grille that successfully blended the existing lines with a preview of styling themes that would debut on the all-new ’53 Studebakers.
But business results for 1952 were mixed. Sales of $586 million were a new record, and net income rose 13 percent to $14.2 million. But profits were far lower than 1948, 1949 or 1950 despite greater sales volume. The problem was high labor costs and low productivity, which had taken root during WWII’s huge demand for military products. Postwar conditions only exacerbated the problem. With the public clamoring for new cars, management wouldn’t risk a strike, caving in to wage demands and turning a blind eye to low productivity. By 1952 work standards at Studebaker were said to be among the lowest in the industry.
The soaring postwar demand for autos suddenly ended. Studebaker introduced all-new cars that year, and they proved the company’s undoing. Originally, the 1953 Studebakers were to have conventional styling. However, Raymond Lowey convinced management to authorize production of a stylish coupe with low-slung, very European styling. But then stylists went back and redesigned the sedans to incorporate elements of the coupe styling and that proved a colossal mistake – the awkward Euro-styling made the cars look small.
While public reaction to the “Loewy” coupe was outstanding, response to the new Commander and Champion sedans was tepid. Another problem was the discovery that the sales division had badly underestimated expected demand for the coupes while overestimating sedan sales. Also hampering sales were production delays caused by front-end sheet metal that would not mate to the body.
This all cost a great many sales, and Studebaker lost money on car production during the first quarter of 1953. April was profitable but in May production had to be cut when a supplier went on strike. Just as that problem was fixed Ford launched its historic Blitz, an attempt to wrest sales leadership from Chevrolet’s grasp. Ford factories shipped thousands of extra cars to dealers, forcing retailers to sell cars for a few dollars over invoice to clear the glut. Chevrolet followed suit and the two giants became locked in a battle that decimated Studebaker. Profits fell more than 80 percent to $2.68 million.
Studebaker’s only real product news for 1954 was the Conestoga station wagon, long overdue and unfortunately offering only two doors just as the market was turning to four-door wagons. As the competitor blitz continued, the company’s financial condition worsened, and wage problems could no longer be ignored. In early 1954 the union signed an agreement providing the company some relief. But Studebaker continued to sink, losing $8.3 million in the first quarter. Production went into freefall, dropping to 113,920 vehicles in 1954 versus 334,554 in 1950.
A merger with Packard appeared to be the only solution. Packard and Studebaker combined would cover nearly every market segment. And if they could produce Studebaker, Packard and Clipper cars on a common body shell, tooling and amortization costs would be sharply reduced.
Neither Studebaker nor Packard looked very promising on paper. Studebaker was losing money at a frightening pace, and although Packard was in better shape financially, it too was losing money. Both companies hoped to avoid having their books closely examined, so an agreement was reached that each would supply the other with the necessary figures on costs, breakeven, net worth and other figures.
They merged on Oct. 1, 1954, with former Packard chief James Nance as president. Studebaker-Packard Corporation was the fourth largest automaker in America with more than 4,000 dealers, two automobile brands, trucks and substantial military business. Nance guessed the firm would lose $9 million in 1955, post a smaller loss for 1956 and record a handsome profit in 1957 with all-new cars on a shared body.
Worried about continuing losses at Studebaker, Nance sent finance VP Walter Grant to South Bend to get a handle on Studebaker’s costs. A shocked Grant discovered that the 165,000-unit breakeven point mentioned in talks was all wrong – Studebaker’s actual breakeven was 282,000 cars. Nance probably wished he had insisted on a complete audit of Studebaker’s books prior to the merger, instead of choosing to neglect fiduciary responsibilities in order to speed things up.
The result showed at year’s end when the company reported an operating loss of $41.7 million, reduced to a net loss of $26 million after tax credits. Until something was done to correct Studebaker’s problems of poor sales and low productivity the bleeding would continue.
The 1955 Studebakers were only mildly face-lifted with a taller hood line and a heavy chrome grille replacing the 1954’s twin grilles. A new top-line 120.5-inch wheelbase President series debuted offering two sedans, a coupe and a hardtop plus the gorgeous President Speedster hardtop sporting simulated wire wheels, bumperettes with fog lights, and beautiful interior trim. Sales rose slightly to 138,742 cars and trucks versus 113,920 the prior year – better, but because 1955 was a record year for the industry, it wasn’t very impressive. The business lost another $29.7 million.
Although the company desperately needed to consolidate Studebaker, Packard and Clipper models on a shared body, no lender was willing to provide the funding. So restricted, the best Studebaker could afford for 1956 was an extensive facelift, sedans and wagons looking more conventional with new fenders, hood and deck lid. Stylists turned the coupe/hardtop body into a new sporty car called the Hawk. The line included a six-cylinder Flight Hawk coupe, a V8 Power Hawk coupe and Skyhawk hardtop and, topping the line, the awesome Golden Hawk hardtop powered by a 352-cid Packard V8.
But buyer response to the 1956 line was only fair and production dropped to roughly 82,000 cars and 20,000 trucks. Studebaker-Packard recorded an operating loss of $43.7 million plus $60 million in special charges for inventory obsolescence and writing down the Packard plants, for a net loss of $102.3 million. The company was dying.
Nance talked with International Harvester, Curtiss-Wright, Chrysler and others about merging or selling assets. Defense supplier Curtiss-Wright was the only one interested, attracted mainly by factories like the modern Utica, Mich., plant where jet engines and Packard V8s were built. Curtiss-Wright president Roy Hurley knew that if he merged, Studebaker-Packard’s prior losses could provide tax write-offs on his future profits. Realizing he had Nance over a barrel Hurley toyed with him, first saying he wanted to merge, then calling it off, stringing things along as S-P’s cash melted away. Hurley demanded huge military orders from the government, which didn’t want S-P to fail, in exchange for helping bail out the company. The hard-nosed tactics worked: Hours before Studebaker-Packard was ready to declare insolvency, a deal was reached.
Curtiss-Wright gave Studebaker-Packard $10 million for its defense business and $25 million to lease its Utica and Chippewa plants for 12 years. Hurley wouldn’t merge though, agreeing only to manage S-P for three years at cost in exchange for an option on five million shares of stock. That way Hurley could run Studebaker-Packard as he wanted without actually taking a financial stake in the firm. If he saved it he could exercise his stock option, buy the company and use S-P tax credits to offset C-W profits. If Studebaker-Packard failed, his own company would not suffer. It was the sort of deal only a desperate company like Studebaker-Packard would agree to. The company also agreed to distribute Mercedes-Benz cars in North America. Hurley felt having another line to sell would strengthen the retail network.
If Studebaker-Packard had been able to use the cash influx to immediately bring out all-new cars, they might have been able to turn things around, but Hurley’s negotiating tactics had wasted a great deal of time. All that 1957 offered was yet another revision of the unsuccessful 1953 cars. The results could have been predicted.
The 1957 models were mildly face-lifted, and a four-door station wagon was finally added to the line-up. The Silver Hawk coupe offered either six or eight cylinders while the mighty Golden Hawk hardtop now offered a 275hp supercharged Studebaker V8. The cars were solid values and the styling was decent, but they came about two years too late to do much good. Packard production was transferred to South Bend and stylists cobbled together a 1957 Packard Clipper by applying 1956 Packard styling cues to the Studebaker President. Fewer than 5,000 were sold.
Noticing the success of import cars, S-P’s new president Harold Churchill wondered if perhaps a low-price full-size car would attract buyers. In mid-1957 he introduced the Scotsman, a line of Champion-based cars stripped to the basics. They were terribly plain cars, but with prices starting at $1,776, they sold fairly well. Losses, however, continued. For 1957 the company lost $11 million.
Model year 1958 brought another facelift of the sadly out-of-date body. Stylists grafted small pods onto the front fenders to fit quad lamps, considered necessary to be contemporary. They came standard on Commander and President, optional on Champion. A stylish new hardtop debuted and the utilitarian Scotsman returned. The company did its best to sell the slightly warmed over cars but it was difficult to compete against competitors’ larger, newer-looking cars. Additionally, buyers’ fears of owning an orphan was a very significant problem.
During the first nine months of 1958 sales fell to $92 million, and the company recorded a loss of $22 million. However, hope began to rise during the last quarter. The management agreement with Curtis-Wright was terminated, and Hurley’s stock option was cancelled. A refinancing plan was worked out, with financial institutions agreeing to cancel notes totaling $54.7 million in exchange for 5-percent secured notes totaling $16.5 million and 165,000 shares of $5 convertible preferred stock, par value $100 per share.
Churchill had come up with a sharp new car, but it came at a cost. Although the financiers were encouraged by the new product, to protect themselves they had the company pledge virtually all its property and plants as collateral. It was critical that the new car be a success; Studebaker was betting the farm.
A Lark and a Prayer
The new car had to be based on the existing body. The most the company could afford was new front and rear sheet metal, so Churchill’s choices were few. Since another facelift of the “big” Studebaker would only cause a further drop in sales, he decided to turn his big car into a compact instead. It would be called the Lark.
Design work was completed by March 1958. The new Lark featured distinctive styling, a spacious interior and trim exterior dimensions. At 175 inches in length it was 16 inches shorter than the Rambler Six. Body styles included two- and four-door sedans and a two-door wagon, and a good-looking two-door hardtop. Lark sedans and hardtops featured a generous 108.5-inch wheelbase while station wagons rode a 113-inch chassis. Prices ranged from $1,925 for the Deluxe two-door Lark VI to $2,590 for the Lark VIII two-door wagon. Also debuting were the Lark-based three-passenger Utility Sedan, two-door Panel Wagon, and Econ-O-Miler Taxi.
Lark’s standard engine was a 90hp, 169.6-cid flathead six, with an optional 259-cid V8 offered in 180hp or 195hp versions. Popular Science called Lark “a fresh idea,” adding: “Sixteen inches shorter than the Rambler, it doesn’t have the Rambler’s big-car appearance ... the Lark looks more like something from Europe.” With the Lark’s introduction the company abandoned the full-size car market.
It was an immediate success, and production rapidly increased to meet demand. Many Big Three dealers who wanted to get in on the compact boom became Studebaker franchisees. The company also acquired distribution rights for the Auto Union-DKW line of cars to provide dealers with another product to sell.
The Lark brought Studebaker back from the brink. For 1959 sales climbed to 160,826 cars, 10,909 trucks and 10,588 Mercedes-Benz/Auto Union vehicles vs. 62,146 cars, 10,735 trucks and 6,420 Mercedes-Benz units in 1958. A profit of $28,544,388 was reported and with tax-loss carry-forward credits it was all tax-free, making it the largest net profit in the company’s history.
One aspect of the 1958 refinancing/restructuring deal was a requirement that Studebaker diversify into other fields to ensure corporate survival if the auto business failed. Because Curtis-Wright failed to go through with a merger, Studebaker still had more than $100 million in tax-loss carry-forwards. Merger and acquisitions specialist A.M. Sonnabend was hired to find suitable companies for Studebaker to acquire. The first were C.T.L. (Cincinnati Testing Laboratories), a specialty plastics company that produced Titan missile nose cones, and Gering Plastics Inc., producer of plastic compounds.
Competition increased in 1960 when the Chevrolet Corvair, Ford Falcon, Mercury Comet and Chrysler Valiant debuted, causing many Big Three dealers who signed Studebaker franchises in 1959 to drop them now that their own brands offered compacts. Studebaker expanded the Lark range for 1960 with convertible and four-door station wagon models, and introduced new Champ pick-ups with a stylish cab based on Lark sheet metal. Sales held up initially but orders soon began to drop. Sales totaled 133,984 units, down from 182,323 in 1959. Net profits were only $708,850 and the auto division lost money. The company continued to diversify, with Clarke Floor Machines, D.W. Onan and Gravely Tractors joining the growing Studebaker family.
Several board members proposed exiting the car business. Churchill objected and by the end of the year he was replaced as president by Sherwood Egbert, formerly with McCulloch Corporation. Egbert was a hard driver, patrolling offices early morning to late at night, asking questions, ordering changes. He personally spoke with more than 700 Studebaker dealers, soliciting suggestions for improvements. Egbert laid out a four-part plan to restore the company to profitability:
1) Continue and expand the acquisitions program.
2) Strengthen the automotive division’s competitive position.
3) Seek a larger share of military business.
4) Create an International Division to sell the company’s broad range of products overseas.
For 1961, Lark got a new 112hp Skybolt overhead-valve six and styling changes including a flatter roof and lowered cowl, hood and rear deck. There was a new grille, and Regal and Cruiser models got standard quad headlamps. A Cruiser V8 four-door on the wagon’s 113-inch wheelbase debuted. Cruiser offered abundant interior space, a standard 259-cid V8 and plush interior trim. In March, Chemical Compounds Inc., maker of STP oil treatment, was acquired.
Egbert worked to improve the dealer network, replacing weak dealers with stronger ones; 180 new dealers were signed in the last four months of the year, bringing the total to 2,102 dealers. He also established factory retail outlets in big cities where Studebaker-Packard had few dealerships. For 1961 sales fell to 102,932 units and the company suffered an operating loss of $3.1 million. But selling Gering Plastics Division for a net profit of $5.66 million more than offset the loss, so the company showed a net profit of $2.535 million for the year. A turnaround appeared imminent. Car sales began to climb, the acquired divisions were profitable, and in the fourth quarter Studebaker-Packard netted a profit of $12.8 million.
Brooks Stevens restyled the Lark for 1962, extending the grille area forward and adding a rich Mercedes-type grille. Longer rear fenders and deck helped increase length by up to 13 inches and all four-door sedans now used the same 113-inch platform as wagons and Cruisers. The sporty Daytona also debuted with standard bucket seats, center console and full carpeting, plus an available four-speed transmission and 225hp, 289-cid V8. Stevens also restyled the Hawk, removing the fins and creating a long, flat roofline to completely change the silhouette and provide more interior room. Called the Gran Turismo Hawk, it was a fast, beautiful tourer.
Egbert announced the new Avanti high-performance sports coupe, with stunning looks and room for four. The fiberglass-bodied Avanti bristled with innovation, offering standard front disc brakes, bucket seats, an aircraft-inspired overhead console and a concealed safety roll bar. A supercharged V8 and four-speed transmission were available.
In 1962 the company was renamed Studebaker Corporation; directors felt including Packard in the corporate name was harming business. Five additional companies were acquired: home appliance maker Franklin Manufacturing; Trans International Airlines, a contract carrier for the military; Schaefer, manufacturer of commercial frozen food and dairy equipment; Domowatt S.P.A., an Italian appliance maker; and Paxton Products, maker of the Paxton supercharger. Although the auto division was still in the red, the company reported a 1962 profit of $2.56 million, which included an operating profit of $489,000. Production of 99,476 cars and trucks in the United States and Canada was up 8 percent over the 92,434 built the prior year, and Mercedes-Benz sales set a new record with 13,300 cars sold. In November, Studebaker expanded its import base, acquiring Canadian distribution rights for Mercedes-Benz and DKW.
The reason the automotive division lost money in 1962 was a strike that shut down production for 38 days, strangling the division’s comeback. With the exception of the strike months January and February, the first nine months of the year saw dramatic increases in car sales.
The 1963 Lark got a more contemporary look. Brooks Stevens restyled the greenhouse with thin window frames and a flatter roofline and windshield. Three trim levels were offered initially: Regal, Custom and Daytona. The stripped down Standard series appeared mid-year, with prices starting at just $1,935. The new Wagonaire also debuted, featuring a sliding rear roof section so tall items like refrigerators could be carried upright.
Soon, Avanti ran into trouble. First it was production delays that caused impatient buyers to cancel orders; then, once the problems were fixed and cars were readily available, the company found it had overestimated its sales potential. Unsold Avantis began to pile up.
Egbert wasn’t ready to quit. High-performance Avanti R-1 and R-2 engines became options to spur Lark and Hawk sales. Andy Granatelli and a team of drivers took a fleet of Studebakers to the Bonneville Salt Flats, setting 72 new USAC records including an incredible 170.8 mph average in an Avanti with Granatelli at the wheel.
But with the Big Three introducing new intermediates there simply was too much competition. Studebaker’s 1963 sales fell to 64,570 units, a 17-percent decline and far below breakeven. Although volume of $403 million was up $38 million from the prior year, the automotive division lost so much money – exceeding $25 million – the other divisions’ combined earnings of more than $11 million failed to offset it and the company suffered an operating loss of $16.9 million. One way or another the problem had to be fixed or the company would simply go broke.
Egbert envisioned a new line of Avanti II cars, two- and four-door sedans based on the Lark chassis with styling inspired by the Avanti coupe. But by then several board members advocated liquidating the auto division and Egbert was unable to continue fighting. The company president had cancer and in November 1963 the board put him on indefinite leave, appointing finance VP Byers Burlingame to take his place.
The banks refused to lend any more money to the auto division unless the corporation agreed to put up its acquired divisions as collateral. The board was unwilling to risk the stockholder’s investment, forcing the auto division to pay its own way. Lacking the money to produce the Avanti II or a new Lark proposed by Stevens, all that could be done was another facelift of the existing car. On a shoestring budget Stevens managed to make the 1964 Larks appear almost all-new. If they sold well the division could continue; if not, Studebaker’s life as automaker was effectively over.
The GT Hawk and Avanti received only minor updating for 1964 but the Larks featured completely new frontal styling. Three series were offered in six-cylinder and V8 models: Challenger, Commander and Daytona, plus a V8 Cruiser. Unfortunately, within weeks it was clear the new cars weren’t selling. There was an 86-day supply in dealers’ hands and 3,000 1963 models remained unshipped; production halted for a week to reduce inventories.
By December 1963 the company was bleeding to death. On Dec. 7, the board reached a decision to shut down Studebaker’s South Bend plant and transfer all car production to the company’s plant in Hamilton, Ontario. Burlingame explained: “The basic difficulty in South Bend was insufficient volume of sales. Our facilities there were such that there was no way to reduce our costs so that a profit could be made upon such volume. The Canadian plant ... can be operated at a profit on much lower volume. Therefore we have decided to live with the sales we have rather than to continue to hope they will improve.”
The company took a special charge of $64 million to cover anticipated losses on disposal of plants, property, tools and inventory, bringing the total loss for 1963 to more than $80 million. By year’s end Studebaker’s net worth had shrunk to $36.7 million.
Hamilton could produce upwards of 36,000 cars annually. Although breakeven was once 7,000 cars, after South Bend closed the plant carried the overhead for the entire sales division, raising breakeven to more than 20,000 units. Hamilton’s workforce was increased from 700 to 1,100 people. To streamline production the Hawk, Challenger, Avanti and trucks were all dropped.
Studebaker sold its U.S. foundry, body, engine and final assembly plants and several other buildings for $13 million, which was applied to debt reduction. Its military truck plant was sold to Kaiser Jeep Corporation.
With South Bend’s closure, retail sales collapsed, declining to 35,373 in the United States and Canada for 1964, versus 73,277 the prior year. Most were cars produced in South Bend before the end of 1963. However, although sales fell to $261 million, plummeting more than $140 million, Studebaker earned $8 million, its first significant profit since 1959. Management investigated importing a low-priced foreign car for its dealers to sell; one possibility was Toyota, a virtually unknown brand.
Studebaker’s 325 Canadian dealers had retailed 7,658 cars in 1964 while the 1,700 U.S. dealers sold 27,715. Exceeding the 20,000-car breakeven in 1965 now seemed a reasonable expectation. Because South Bend no longer produced engines, the company had to find another source. McKinnon Industries of St. Catherine’s, Ontario, a GM subsidiary, agreed to supply Chevy six and V8 engines. Production of the 1965 cars began in August 1964 with introduction scheduled for October. With no styling changes to speak of, the company boasted its cars offered the most standard equipment in their class. The line-up included 10 models: Commander two- and four-door sedans and a wagon, plus a Cruiser four-door, all offering six-cylinder or V8 engines. The Daytona (V8 only) offered a two-door Sport sedan and a four-door wagon; no convertibles or hardtops were offered. In all, just 19,435 1965 Studebakers were built. The company reported total sales of $192 million, down $69 million from prior year, but earned a $10.7 million profit. That February the Mercedes-Benz distribution rights were sold to Daimler-Benz.
Trade rules allowed home market producers to import cars into Canada duty-free, so auto division president Gordon Grundy tried to increase income by making a deal with Volkswagen to import VWs and sell them to Volkswagen Canada for a slightly lower price, with Studebaker earning a $150 profit on each. His attempts to get distribution rights to Toyota or Datsun cars came to nothing.
For 1966 a Dearborn, Mich., design firm, Marcks, Hazelquist and Powers (MHP), was hired to restyle the cars. Bob Marcks, a talented ex-Loewy designer, freshened up the frontal appearance with a handsome new grille, dual headlamps to replace the quads, and lower bodyside moldings. To upgrade the car’s image Marcks specified rich interior fabrics and elegant colors and trim of the type usually seen in luxury cars. The line-up included Commander two and four-door sedans, a Wagonaire, Daytona two-door sedan and Cruiser four-door, each offering six or V8 power. Prices began as low as $2,060.
As good-looking as the new cars were, management decided to close out the business. On March 4 they announced that production would end the following day. Only 2,045 cars had been produced during calendar 1966, an annual rate equal to just 12,000 units per year. Management said the auto division closure was due to “heavy and irreversible losses,” though Grundy claimed his division was operating profitably at the time. Facts tend to support management’s statement: Although the breakeven point was 20,000 units (about 10 cars per year for each of Studebaker’s 2,000 U.S. and Canadian dealers) sales didn’t reach that in 1965, and the production rate in early 1966 was running well below 20,000 cars annually.
Meanwhile, MHP had nearly completed designing the 1967 Studebakers, with minor changes that greatly improved the styling. Using a 1966 car MHP mocked-up a 1967 model, with thick side moldings and a rear bumper raised to just below the decklid for a sleeker look. A new grille featured two panels inside a larger rectangle. The handsome styling compared well with competitors.
Marcks also created proposals for designs to carry Studebaker to 1970 and beyond. A complete redesign was out of the question, so MHP focused on restyling the existing car. One concept was a sedan with Hawk styling themes; another featured a sloping hood and twin grilles like the 1953 models. A gold four-door sedan represented what Studebaker might look like in 1970.
Naturally, the corporation continued on despite the car division shutdown. Management considered the remaining divisions a foundation to grow on. The company became America’s largest producer of tire studs for snow tires, and acquired Big Four Industries, maker of tire-studding guns and tire-changing equipment.
Sales dropped again in 1966, to $172 million but net income rose to $16.4 million. Other companies became interested in Studebaker; its remaining tax-loss carry-forwards making it a good prospect for merger. The company held talks with Wagner Electric Corporation, meanwhile selling two under-performing divisions, Cincinnati Testing Laboratories and Franklin Appliance, which by then were barely profitable.
Studebaker, Wagner Electric and Worthington Industries came together in 1967 to form Studebaker-Worthington Inc. It brought together Studebaker’s profitable divisions: Clarke Floor Machines, Gravely Tractors, Schaefer, Chemical Compounds (which eventually was renamed STP Corp.) and Onan, with Wagner Electric’s automotive electrical and brake businesses and Worthington’s diverse holdings in construction equipment, valve and power-generation businesses. The new corporation’s annual sales revenue for 1967 exceeded $650 million.
In 1973 – the 10th anniversary of South Bend’s closing – Studebaker-Worthington sales exceeded $1 billion. Onan sales alone were more than $100 million, STP sales were $87 million, Clarke-Gravely $58 million and Schaeffer just under $10 million. If Studebaker had remained independent it would have had annual sales of well over $250 million.
Studebaker-Worthington was acquired by McGraw-Edison in 1979, and a few years afterward McGraw-Edison was absorbed by Cooper Industries. With no attachment to any particular product the Studebaker name faded away. But it had long ceased to be the same company. Its old slogan “Always Give The Customer More Than You Promise” was out of date. Studebaker-Worthington had become a conglomerate that boasted mainly about how much money it made.
Farewell, Studebaker. Although it’s sad to lose so great an automaker, you left behind a heritage of great cars and trucks, a rich legacy that can never fade away.
By: Patrick Foster
Friday, April 3, 2009
Wednesday, April 1, 2009
1963 Studebaker Avanti

Probably the most remarkable car that came on the market in 1963: the Studebaker Avanti sports car. The Studebaker management felt that the company needed a product that would boost the slipping image of its name in order to survive. In that respect they commissioned the development of an exotic sports car in 1961.
World-renown designer Raymond Loewy, already responsible for some great Studebaker-designs in the early 1950s, was asked to do what he did best: to design a car with an elegant four-seater coupe body. Because the development and production costs for this model had to be as low as possible, the body was made of fiberglass and was placed upon the 2-door Lark chassis. The car was named "Avanti" (=forward in Italian) and meant to be introduced at the 1962 Indianapolis 500. Unfortunately production problems resulted in a costly delay and so the car appeared in 1963.
Caliper disc brakes
...overhead switches
...safety roll bar
At its introduction the Avanti aroused a lot of attention, and it still does today as you can see on this picture. Still, the 6 month production delay caused by lacking body-shell quality by the manufacturer (the same that supplied GM with Corvette bodies), proved critical. A lot of advance orders were cancelled and sales remained limited.
The Avanti design however turned out very well. On the outside it looked very modern and a trend-setter with very clear and flowing lines. On the inside it was inspired by aircraft. It featured overhead rocker switches which controlled lights and ventilation, a wonderful padded interior with full bucket seats and fancy red-illuminated dials. Practical luxuries were the interior access panel to the luggage compartment and the beauty vanity in the dashboard on the passenger side, complete with pop-up mirror, makeup tray, accessory shelf and beverage tray. For safety and rigidity reasons a "safety steel arch" was fitted behind the doors, something we now call a roll-over bar, to protect the inhabitants from decapitation in accidents where the car landed on its head (the fiberglass hull itself offered virtually no protection at all).
Dashboard with "beauty vanity"
...interior luggage access panel
...hand-crafted interior
The rear looks special too with tiny lights and a big panoramic rear window. Judging by the plates on this car it was registered late 1962, so it was probably one of the first Avantis in Holland.
Standard motorization for the Avanti came from the 240 hp Jet-Thrust V8, propelling this 1500 kg car to an interesting maximum of 225 kph. To cope with that speed a modern front wheel suspension lay-out was fitted including racing-type caliper disc brakes. In the rear there were finned drum brakes and all brakes were power operated. Transmission was Studebaker's Power-Shift, an automatic that also permitted manual shifts.
For model year 1963 some 3,834 Avantis have been produced. For model year 1964 a mere 809 Avantis left the factory, and after that the production of this model was stopped. By Studebaker that is. Because in 1965 the Avanti reappeared, but now it was produced by the Avanti Automotive Corporation in a small portion of Studebaker's original South Bend plant. Two local Studebaker dealers had bought the name, plans and molds of the Avanti and managed to produce it (as the Avanti II) with some commercial success up to the 1990s. These were however hand-built exotics, custom-made and rather expensive and only a few hundred of them left the factory each year.
Paxton superchargerStudebaker offered the Avanti with the un-blown Jet-Thrust R1 V8 as standard, but if you wanted more, you could. A lot... Most common option was the supercharged Jet-Thrust R2 engine. This engine featured Andy Granatelli's Paxton supercharger like you see here on the picture, and it offered 290 hp instead of 240. It increased top speed and 0-60 mph (0-96 kph) acceleration was brought down to 7.3 sec.
More exotic options were the bored-out Jet-Thrust V8s, now with 4990 cc (304.5 cid) capacity: there was the supercharged R3 with 9.6:1 compression and 335 hp, the un-blown R4 with twin 4-barrel carburetors, a 12:1 compression and 280 hp and the more experimental R5 version with two superchargers (one per cylinder bank), magneto ignition, Bendix fuel injection and a staggering 575 hp! The Jet-Thrust R3 and R4 were manufactured in 1963 but designated to be model year 1964 engines; the R5 wasn't offered by the factory but probably was by Paxton Products.
Nowadays the Avanti enjoys an enthusiast following and is one of the best valued Studebakers. A lot of the 4,643 original Avantis have survived to this day and have ended up in collections and museums. Still it has remained a car that only car buffs seem to know about, especially outside the US. That's probably the reason why here in Europe you can pick one up for a rather agreeable price, if you can find one...
For Studebaker the Avanti wasn't the rescue that was hoped for. It came too late to end Studebaker's downward spiral and at the end of 1963 the South Bend plant, Studebaker's 100 year old home ground, was sold off. Production was transferred to Studebaker's small assembly plant in Hamilton, Canada in a desperate attempt to survive as a low-volume manufacturer. The management hoped to continue on a profitable 20,000 cars a year basis, but without development facilities and sufficient financial backing this proved to be a dead end. After producing a mere 8,947 cars in 1966 the Studebaker Corporation's long history eventually ended there in Ontario.
Studebaker Avanti
Studebaker AvantiThe Studebaker Avanti was a sports coupe built by the Studebaker Corporation of South Bend, Indiana, USA between June 1962 and December 1963. Designed by a team of stylists employed by industrial designer Raymond Loewy, the Avanti featrured a radical body design based on the Studebaker Lark convertible chassis. After the closure of Studebaker's factory in December 1963, The Avanti model name, tooling and plant space were sold off to two South Bend Studebaker dealers. They introduced a slightly modified version of the car in 1965 under the brand name "Avanti II", but neither it nor subsequent models assembled by a succession of entrepreneurs had any further association with either the Studebaker Corporation or brand name.
Introduction
Avanti is Italian for "forward" or "advance." While Jaguar began offering production-car disc brakes in 1957 on the XK150, the Avanti was the first American mass-produced car to feature standard disc brakes. The Avanti's emphasis on safety, with seatbelts available as a dealer-installed option (but almost always fitted), Mercedes-Benz-designed safety door-latches, fully padded dash and a roll-over protection bar was also very advanced.
Origins
Concept sketch by Raymond LoewyThe Avanti's classic design originated in an intense five-week session in a rented house in Palm Springs, California near the home of lead designer Raymond Loewy with the team of Bob Andrews, Tom Kellogg, and John Ebstein.[1] The waist had a coke bottle shape, which held up a thin-section roof with a bubble-back rear window and an integral rollbar. Loewy achieved the look of a rear-drive sports car by replacing the function of a conventional grille with a bottom breathing air intake placed under the front bumper, a styling feature that reached the family sedan in the 1980s with the Ford Taurus The driver looked over an asymmetrical hump in the hood. The cockpit had crash padding, and seating was in four bucket seats. It would be put into production with few changes from the original small-scale model.[2] The unique and classic aesthetics of the car garnered a following, and it consequently lived on in production as a hand-built, custom-order model decades after Studebaker closed its doors.
In the early 1960s, Studebaker needed some excitement in the showrooms but, because of its precarious financial situation had little capital to invest in product development. Although the Avanti looked entirely new, it was mounted on a 109-inch (2,769 mm) Lark convertible frame, still based upon the 1953 design.[1] For power, the Avanti relied on Studebaker's own old-design but rugged V8. For use in the Avanti, several high-performance modifications were utilized.
Power
The Avanti engine was available in four versions named the R-1, R-2, R-3 and R-4. They were based upon a 232-cubic-inch V8 Studebaker engine that produced 120 hp (89 kW) when introduced in 1951. By 1963 the Avanti version of this engine, the R-1 289, produced 240 hp (179 kW). The optional R-2 version with its Paxton supercharger produced a rated 289 hp (216 kW), or one per each cubic inch of engine displacement.
To put the performance of Studebaker's supercharged 289 V8 in perspective, the Ford 289 V8, as used in the 1964-1/2 through 1967 Mustangs, produced 210 hp (157 kW) with a two-barrel carburetor, 220 hp (164 kW) with a four-barrel carburetor, and 271 hp (202 kW) in Ford's high-compression, solid-lifter, four-barrel "K-code" engine. Thus, Studebaker's "Jet Thrust" 289 V8s were significantly more powerful than any naturally aspirated 289 production engine offered by Ford through 1967 (in 1968, Ford began relying on the new 302-cubic-inch engine).
Studebaker had first used Paxton superchargers on the 1957 and '58 Studebaker and Packard Hawks. Subsequently, they bought the company. With the assistance of auto racing legend Andy Granatelli, Studebaker developed an R-3 and an R-4 engine for the Avanti. The first R-3 was a 289 cu in (4.74 L) was bored initially to 299 cubic inches (4.90 L). Later versions were 304.5 cubic inches (4.990 L) (just under the class-C five-liter limit). The R-3 employed special cylinder heads with much larger intake ports and larger valves, an aluminum intake manifold with correspondingly larger ports, long-branch lower restriction exhaust manifolds, longer-duration camshaft, and a Paxton supercharger blowing through a Carter AFB four-barrel carburetor mounted in a pressurized aluminum box. The R-3 was rated at 335 hp (250 kW), but reportedly produced 411 hp (306 kW) at the flywheel. The R-4 engine was essentially the same as the R-3 engine except that it incorporated domed pistons for a higher compression ratio and a dual four-barrel manifold with two Carter AFB carbs. The R-4 was rated at 280 horsepower (210 kW).
On August 14, 1962 the prototype R-3 (299 cid) driven by Andy Granatelli set several land speed records with the top speed of 168.15 mph (270.61 km/h) for the Flying Mile. This Avanti was later modified into the Due Cento for the 1963 Bonneville runs. In October 1963, Granatelli took several Studebakers to the Bonneville Salt Flats, including an R-3 Avanti (#9) in which he reached a record speed of 170.78 mph (274.84 km/h). By the time he was done, Granatelli had set or broken 34 U.S. land speed records in the Avanti, allowing Studebaker to proudly proclaim it the "World's Fastest Production Car". In addition to being fast, the Avanti led the domestic auto industry in the use of front caliper disc brakes (Dunlop discs produced under license by the Bendix Corporation).
A one-off custom version of the Studebaker V8 was the Granatelli-developed, experimental R5. With Bendix aircraft fuel injection as used on the Novi Indy car and a Paxton supercharger mounted to each cylinder bank, it produced 638 horsepower (476 kW) on the Paxton dynamometer. The R-5 was mounted in Granatelli’s special Avanti “Due Cento” (200 in Italian), with which he planned to break 200 miles per hour. Unfortunately, Granatelli could not get enough traction during his Bonneville run, achieving a top speed of 196.62 miles per hour (316.43 km/h). The R5 never officially competed again.
Early orders and problems
The Avanti was heavily promoted, and was named the Official (honorary) Pace Car of the 1962 Indianapolis 500-mile (800 km) race. Enthusiastic buyers placed advance orders, however, long production delays depressed sales, and led to the substitution of the Lark Daytona Convertible to pace the "500". The major delay was caused by problems with the alignment of some of the fiberglass body panels and the rear window opening being too big for the glass. These difficulties were quite surprising to Studebaker executives, since body fabrication had been farmed out to the Molded Fiberglass Products Company of Ashtabula, Ohio, the firm that had been making Chevrolet Corvette bodies since 1954. To solve these problems, Studebaker was eventually forced to assemble the body panels themselves — but it was too late, as many sales had already been lost.
Instead of offering separate model years of the Avanti, Studebaker made running changes until production of the car ended. In general, the easiest way to differentiate between the earlier and later variants is by the headlight bezels. All Avantis produced from June, 1962 through July, 1963 featured round headlight bezels. Beginning in August 1963, the car was fitted with squared bezels. Most people refer to the models with round headlight bezels as 1963s and the models with square headlight bezels as 1964s, though a number of early 1964 models were made with the round headlight surrounds.
On December 9, 1963, Studebaker announced the end of car and truck manufacturing in South Bend, and the consolidation of all vehicle manufacturing in its Hamilton, Ontario, Canada plant. At that point, the company dropped the Avanti, the Gran Turismo Hawk, and all pickups and trucks in order to focus on sedans, coupes and station wagons. Only 4,643 Avantis (not including prototypes, some of which were assigned serial numbers at the end of the run) had been produced by the time Studebaker closed the South Bend factory on December 20, 1963. The final Avanti, a white fully optioned R-3 car, contained a letter signed by Studebaker employees advising the future owner of the car's significance under the carpeting near the spare tire well.
Studebaker survived another two years by assembling Commanders, Daytonas, Wagonaires and Cruisers at Hamilton that were equipped with 230-cubic-inch six-cylinder and 283-cubic-inch V8 engines sourced from GM Canada, and ended automobile production on March 17, 1966.
Avanti II and XUV
Following the closure of the South Bend operation, two South Bend, Indiana Studebaker dealers, Nate Altman and Leo Newman purchased the Avanti name, the body molds, remaining parts, tools, jigs, and a portion of the South Bend factory to continue making the Avanti. These Avantis, called the Avanti II, were given a 327 in³(5.4 L) Chevrolet Corvette engine and were meticulously hand-built to order in very small numbers. The Avanti II's engine evolved from the 327 to the 350, the 400, and finally the 305. All Avanti IIs were built on leftover Studebaker chassis until 1987. The 1987-89 models were based on GM's G-platform that underpinned the Chevrolet Monte Carlo.
On October 1, 1982, real estate developer Stephen H. Blake bought the rights to the Avanti II. Steve Blake made some updates to the car, notably the change to plastic, integrated bumpers and a redesigned dash and interior (introduced on a limited production run of "20th Anniversary" cars, but continued on for subsequent production) and also introduced a convertible model. At that time the "II" was dropped from the name, although the car remained substantially the same except as previously mentioned. Blake's company declared bankruptcy in 1986, and the company was purchased by Michael Kelly, who relocated production to Youngstown, Ohio.
A second-generation automobile was styled by Tom Kellogg, one of the original Avanti design team members working for industrial designer Raymond Loewy, in the late 1980s. This car was based on GM's "F" platform Camaro/Firebird. Tom Kellogg was fatally injured in a car accident in California on 14 August 2003.
In 2003, Avanti Motor Corporation of Villa Rica, Georgia announced a Studebaker-branded SUV, the "XUV". A demonstration model appeared at the Chicago Auto Show. General Motors sued, claiming infringement of the trade dress of its Hummer model. In 2004, the parties announced a settlement.
In October 2005 an internet report was published that "Avanti Motors" had "recently announced a new relationship with Ford Motor Company and was planning "a big comeback". The new Avantis, very similar in appearance to the Firebird-based cars designed by Kellogg, were to be based on the current-generation Ford Mustang and were available as both coupes and convertibles. An October 2006 brief report said the company had established a new factory at Cancun, Mexico and planned to produce 400 vehicles per year. A brief chronology of relevant events from 1961-2005 was published but all production of new vehicles has apparently ended. As of 2007 they planned to produce 150 cars per year. A website still exists at http://www.avantimotors.com/
Michael Eugene Kelly, owner of Avanti Motors Corporation, was arrested by the FBI on Dec 22, 2006 in Florida. Kelly is suspected of running a $400 million Ponzi scheme from 1992–2004 and is in jail without bail facing mail fraud charges.
Scale model reproductions and kits
AMT has issued a 1:25 scale "Trophy Series" plastic kit of the Avanti. Scale appearance is very good with opening doors as well as the more common hood. The kit has optional round or square headlight buckets. The model includes engine pieces to build the R5 dual-supercharged engine used by Andy Granatelli in an unsuccessful attempt to exceed 200 mph at Bonneville. The kit has been re-issued several times since its 1965 release.
Aurora Plastics also made a 1:25 scale Avanti kit. The detail level is comparable to that of the AMT kit. No engine or appearance options are offered.
Micro Machines made preassembled reproductions of the Avanti in a very small size in several colors.
Johnny Lightning produced a 1:64 scale 1963 Avanti in 2006.
Mattel's Hotwheels produced a 1:64 scale 1963 Avanti in 2008.
Franklin Mint Models also made a highly detailed die-cast replica of the Avanti in 1:24 scale with opening doors and hood, and meticulously reproduced engine details.
Die-cast models of 1963 Avantis are available in several colors in both 1:32 and large 1:18 scale are produced by various companies. They feature opening doors and hoods.
1963 Studebaker Lark

Brooks Stevens also revised the Lark Station Wagon for 1963. It was now called Wagonaire and featured a remarkable sliding roof above the cargo compartment. This enhanced practicality and Studebaker advertised it as "a family car, a functional utility wagon and a fun-filled convertible". The tailgate was changed into a one-piece lid with a roll-down rear window.
Lark Wagons were available in Standard, Regal and Daytona trim, but only the Regal and Daytona versions sported the sliding roof. The Daytona Wagonaire was fitted full deep-pile carpeting throughout, including the cargo compartment, as a bonus.
An optional rear facing third seat
...and the standard sliding roof
Special options for the Wagonaire included a folding ladder on the tailgate, a "hideaway" third seat for extra passenger space and a luggage roof rack. The Wagonaire could be had with any Studebaker engine, including the supercharged Jet-Thrust V8: that must have been some Wagon! Perhaps an option to get rid of those pesky boy scouts that seem to bother the Wagonaire in this picture...
Unfortunately the Lark Wagonaire with sliding roof had one annoying problem: the roof leaked, even when properly closed. That was why the Lark Standard station wagon with normal roof remained a popular choice.
Lark CruiserTop of the Lark line was this Cruiser, although Studebaker didn't advertise it being a Lark. Studebaker liked to see it as a "Limousette", a small limousine more upmarket than the bread-and-butter Lark. On the picture you see it accompanied by a historic Studebaker dog cart; what image did they try to convey here?
Unlike the other Larks the Cruiser wasn't available wit the Skybolt Six. It came with the Thunderbolt V8 as standard: a 4736 cc (289 cid) 8-cylinder offering 210 hp @ 4500 rpm with 2-barrel carburetor, or even 225 hp @ 4500 rpm with the optional 4-barrel carb.
Lark Cruiser InteriorThe Cruiser was packed with luxury in an attempt to put it in a higher market segment. These bucket seats were an option, as was a sunroof. Studebaker made a big point about it being a rival to the most expensive limousines, which was probably going a bit too far. But still it was quite roomy and comfortable and it had a potent performance.
A practical aspect of the Cruiser was the absence of door sills. It made cleaning the car much easier and prevented tripping and the accumulation of snow and water on the floor. In addition the door openings on the Cruiser were also wider for easier access.
Floor level door sills...
wider door openings...
pleated storage pockets.The pleated storage pockets you see on the picture above were fitted on both sides of the front seatbacks. These are all nice details, but does it make a limousine?
Despite the inventive marketing the Lark's fortunes were waning. The production figure for the 1963 Lark range stopped at 74,201, a 21 percent drop compared to 1962. Therefore the Lark name was dropped after 1963 and the remaining Canadian production resorted to the Daytona and Cruiser names, in combination with the reintroduced Commander designation.
The amazing thing about the 1963 Larks was the wide range of engines that were available. Next to the mentioned Skybolt Six and 259 V8 there were the Thunderbolt V8 from the Cruiser, the Jet-Thrust V8 with 240 hp and the Supercharged Jet-Thrust V8 with an ample 290 hp. The Jet-Thrust engine was based on the Thunderbolt and had the same 4736 cc (289 cid) capacity but was fitted with high-lift racing camshaft, dual-breaker distributor, 4-barrel carb and a dual exhaust system. The customer could specify any of the V8 engines in his Lark 8; the Lark 6 customer however was limited to the trusty Skybolt Six with single barrel carburetor.
Studebaker Wagonaire
1963 Studebaker WagonaireThe Studebaker Wagonaire was a station wagon produced by the Studebaker Corporation of South Bend, Indiana from 1963 to 1966. The wagon featured a retractable sliding rear roof section that allowed the vehicle to carry items that would otherwise be too tall for a standard car of the era.
Studebaker Wagonaire's unique roof was the invention of industrial designer Brooks Stevens, who was charged by the company's president Sherwood Egbert to find as many ways possible to expand the company's limited model range without spending vast amounts of capital on retooling. Ironically, Stevens was also the designer of the Kaiser Jeep Wagoneer, a truck based SUV that remained in production until the 1990s.
The Wagonaire, which was inspired by Stevens' German-built 1959 Scimitar concept car, was based on the standard Studebaker Lark station wagon body, which was suitably modified above the beltline. What made the car unique was the roof over the cargo bay, which manually retracted into and then locked into position in the forward section of the roof above the rear passenger's seat. This unique configuration allowed Studebaker to boast that the Wagonaire could transport items (such as standard size refrigerators) in an upright position.
Wagonaires seated six passengers (five with the optional front bucket seats), and could seat eight when equipped with a rear-facing third-row seat, which was available as an option through 1965. When the third seat was ordered, the cars were fitted with special "Captive-Air" (puncture-resistant) tires, as the additional seat took up the space required for a spare tire and wheel.
Unfortunately for Studebaker, early buyers soon found that their new wagons' roofs leaked water near the front of the sliding section. This problem was addressed -- with limited success -- by the factory. As a result of the leak problem, fixed-roof station wagons were rushed into production alongside the Wagonaire and became available in January 1963. These sold for US$100 less than the sliding-roof wagons, but it was technically a "delete option", meaning that if the buyer wanted the fixed roof versus the slider, it had to be specifically ordered that way by the selling dealer and was not a separate model.
When Studebaker closed its South Bend, Indiana assembly plant and continued production at its Hamilton, Ontario, Canada, plant, the company eliminated its "halo" models, the Avanti and Hawk, but continued to build Lark-based sedans and Wagonaires.
The 1964 models, which were built only in Canada after December 1963, were the last to carry Studebaker's own engines. Beginning with the 1965 models, General Motors supplied engines based on the Chevrolet six-cylinder and V8 designs. The 1965 models were available only with the sliding roof.
The fixed-roof option made a return for Studebaker's final model year in 1966, but the third seat was no longer offered. In addition, the '66 Wagonaire finally was made a model in its own right, blending the exterior features of the Commander with the interior trim grade of the sporty Daytona. Only 940 Wagonaires were built for '66, making any fixed-roof model rare.
Matchbox-Lesney made a miniature Wagonaire, complete with a sliding roof section, which was sold for many years after Studebaker stopped production. Husky also manufactured a Wagonaire similar in size to the Matchbox product.
A high-performance station wagon?
The 1963-64 Daytona version of the Wagonaire could be considered the forebear of the current "pocket-rocket wagon" fad. When equipped with a V8, Carter 4 barrel carburetor, and a column mounted shifter manual transmission with overdrive, the Wagonaire could hold its own against several makes of "muscle cars" from the era. Interestingly, from its earliest days on the market, the Wagonaire could be ordered with any of Studebaker's available "R-series" high-performance Avanti V-8 engines and the four-speed floor-shift manual transmission. Few (if any) were ordered with such high-performance equipment, however.
Short-lived revival of the concept
The concept of the retractable roof was picked up by automaker General Motors for a model in its GMC Envoy line in 2003 as a 2004 model. Ads for the new Envoy XUV incorrectly touted the feature as "first ever". One feature that GMC did adopt that Studebaker never did was power operation of the roof section.
However, the Envoy XUV was no more popular than the Wagonaire had been, and GMC discontinued the model in 2005.
Studebaker Lark
Studebaker Lark VIII Production 1959-1966 The Lark was a pioneering "compact car" designed and built by Studebaker and introduced as a 1959 model.
From its introduction in 1959 until 1962, the Lark was a product of the Studebaker-Packard Corporation. In mid-1962, the company dropped "Packard" from its name and reverted to its pre-1954 name, the Studebaker Corporation. In addition to being built in Studebaker's South Bend, Indiana, home plant, the Lark and its descendants were also built in Hamilton, Ontario, Canada from 1959 to 1966 by Studebaker of Canada Limited. The cars were also exported to a number of countries around the world as completed units and completely knocked down (CKD) kits.
Lark-based variants represented the bulk of the range of models produced by Studebaker after 1958 and sold in far greater volumes than the Hawk family sports car and the later Avanti. The company, which celebrated its 100th anniversary in 1952, ceased auto production in 1966.
Development
At the time the Lark was conceived, Studebaker-Packard Corporation was under a management contract with Curtiss-Wright Aircraft Company. Studebaker-Packard had been losing money for years when company president Harold Churchill came up with the idea of abandoning the full-size car market in favor of building a new compact car that he hoped would save the company.
The Lark was ingeniously designed around the core bodyshell of the full-sized 1953-1958 Studebakers. By reducing the front and rear overhangs and shortening the wheelbase, the car could still seat six people comfortably and hold a surprising amount of luggage. It was hoped that the vehicle would save America's oldest vehicle manufacturer when it was launched in the fall of 1958 as a 1959 model, much like the 1939 Studebaker Champion had saved the company in the years prior to World War II. In fact, it was the Champion which Churchill specifically took as his inspiration for the Lark.
Two series of Larks were available, the Lark VI and the Lark VIII, both designations indicated engine type of the cars. Both series were available in "Deluxe" and "Regal" trim levels.
With its simple grille, minimal and tasteful use of chrome and clean lines, the Lark "flew" in the face of most of the established "longer, lower and wider" styling norms fostered by Detroit's "Big Three" automakers (General Motors, Ford, and Chrysler). Studebaker's 1957-58 Scotsman had proved the existence of a demand for a less-flashy automobile, and while the Lark was not nearly so undecorated as the Scotsman, it was unmistakably purer of line than anything Detroit would offer for 1959.
1959 - 1961

First generation
Assembly
South Bend, Indiana
Hamilton, Ontario, Canada
Engine(s)
170 cu in (2.8 L) I6
259 cu in (4.2 L) V8
Wheelbase 2790 mm (109.8 in)
Wagon: 2900 mm (114.2 in)
Sales of the Lark were good for the 1959 and 1960 model year, thanks to the fact that Studebaker had obtained "dual" dealerships with dealers of the Big Three manufacturers that did not as yet have their own compacts to sell.
Initial models included two- and four-door sedans, a two-door hardtop coupe and a two-door station wagon, with two levels of trim (Deluxe and Regal) offered on most. Aside from American Motors Corporation's Rambler line, the Lark offered the broadest line of compacts on the U.S. market. Indeed, the Lark was the first car of its size to offer a V-8 engine - the similarly-sized Rambler American offered only an inline six.
The lineup grew for 1960, when the company issued a convertible (Studebaker's first since 1952) and a four-door station wagon. Two-door wagons were fast falling from favor throughout the industry, despite a minor redesign which made the two-door Lark wagon's tailgate and rear side windows more user-friendly, and indeed the four-door quickly proved the more popular of the two available wagons from Studebaker.
A taxicab version of the Lark, originally called the "Econ-O-Miler," was built on the station wagon's longer 113-inch (2,900 mm) wheelbase. The extra 4.5 inches (110 mm) of wheelbase translated into extra rear seat legroom, which was important in the taxi trade.
For 1959 and 1960, Larks were available with either an L-head (flathead) 170 cu in (2.8 L) six-cylinder engine or the company's 259 cu in (4.2 L) V8. Testers at the time gave high marks to the V-8's performance. A V-8 Lark could turn out a 0 to 60 mph time of around 10 seconds, which was on par with much larger cars. By comparison, among the early Big Three compacts (Ford Falcon, Chevrolet Corvair and Plymouth Valiant) that arrived on the scene in 1960, only the Valiant could break the 20-second mark from 0-60 mph. None of the Big Three compacts offered a V-8 until the second wave of such cars - the so-called "senior compacts" - arrived for 1961.
To meet the challenge of those new cars head-on, for 1961 Studebaker created a new four-door sedan, the Cruiser, using the Econ-O-Miler taxicab body with an upgraded, more luxurious interior. The resulting car harked back to the long-wheelbase Studebaker Land Cruiser sedans of the late Forties and early Fifties. These cars can be distinguished from their lesser four-door counterparts by the 1959-60-style roofline and operational vent windows in the rear doors, while other sedans used one-piece glass in the rear doors.
A new option, a canvas-covered folding sunroof dubbed the "Skytop" was introduced as an extra-cost feature for sedans and the two-door hardtop. A mild restyling, too, was carried out. Non-Cruiser sedans and the two-door hardtop received a squared-off roofline, and a new front end design gave the Lark a broader grille and the availability of quad headlamps (as standard equipment on Regal and Cruiser models, optional on Deluxes).
Although the styling was modified, engineering enhancements were the big news for 1961, as the Larks received a performance boost. Studebaker advertised as "the compact with Performability," and this was abetted by the addition of the 289 cu in (4.7 L) V8 from the Hawk family sports car as an option, although this was mainly for Larks intended for police pursuit packages. The bigger news, as far as the general public was concerned, involved the six-cylinder engine. Studebaker's engineers had long known that their little flathead mill, which dated in its basic form to 1939, was falling farther and farther behind the competition in both power and fuel economy. Lacking the budget to design a completely new engine, the engineering staff converted the 170 engine to overhead valves while retaining much of the basic design. The "new" six, which displaced the same 170 cu. in. as before, went from 90 horsepower (67 kW) to 112 horsepower (84 kW), all without a loss in fuel economy. Indeed, most road testers of the day found the new engine to be easier on fuel than the flathead, and cars so equipped were able to shave nearly four seconds off the all-important 0-60 mph time. The redesigned six, known as the "Skybolt Six," was marketed by Studebaker extensively in 1961.
Other engineering improvements that modernized the '61 Larks included the introduction of cowl ventilation, suspended brake and clutch pedals (accompanied by a firewall-mounted brake master cylinder) and revamped steering systems.
Unfortunately, for all of its new engineering and the mild restyling, sales of the Lark dropped off precipitously for 1961. Even more new competitors were squeezing their way into the marketplace, as Dodge brought out the Lancer, and General Motors issued the Buick Special, Oldsmobile F-85 and Pontiac Tempest. These new "senior compacts," in addition to their very presence in the market, caused other problems for Studebaker. Most of the Big Three dealers who had signed on with the independent when the Lark debuted dropped the smaller company under pressure from the Detroit manufacturers once the new cars broke cover. Those who did not drop Studebaker outright often put more effort to selling their other product lines.
1962
1964 Studebaker Lark Daytona convertibleSecond generation Production 1962-1964
Assembly
South Bend, Indiana
Hamilton, Ontario, Canada
In an effort to reverse the downward sales trend created when Detroit rolled out its own compacts in 1960 and '61, new Studebaker-Packard president Sherwood Egbert called upon his friend, noted industrial designer Brooks Stevens, to effect a striking yet cost-effective 1962 update. Stevens lengthened the car body, especially at the rear, and modernized the interior. Studebaker had entered into a distribution agreement with Daimler-Benz in 1957, and the design of the Lark's new grille was intended to mimic the famed Mercedes-Benz radiator shell. Studebaker's board of directors was reportedly extremely pleased with the extent of the changes Stevens was able to make. They could not believe he could do so much for so little money.
In addition to the new styling, Studebaker joined the bucket-seats-and-console craze of the early 1960s with the introduction of the Daytona. In the same way that the Cruiser had become the top-of-the-line four-door for 1961, the new Daytona replaced the Regal as the top-trim convertible and hardtop, although Regal versions of these body styles remained available.
All four-door sedans for 1962 moved to the Cruiser's 113-inch wheelbase body. However, the Cruiser remained the only four-door with rear-door vent windows. Two-door models gained a half-inch in wheelbase, up from 108.5" to 109".
The only model that was deleted from the 1962 lineup was the Deluxe series two-door wagon, which had slipped in popularity since the four-door wagon's debut in 1960. However, some leftover 1961-model two-door wagon bodies were fitted with the new 1962front clips. This was done to fill a U.S. government fleet order. No one is certain how many were built, although the number was certainly minuscule, and none are known to exist today.
The immediate effect of Stevens' restyle was improved sales. Indeed, had it not been for a strike called by the United Auto Workers Local 5 in early 1962 at Studebaker's South Bend home plant, writers then and now expressed confidence that the company could have easily sold more than 100,000 of the new cars. Despite the strike, the company sold over 90,000, far more than had been sold in 1961.
1963
For 1963, Stevens again restyled the Lark. The dated wrap-around windshield was eliminated and the entire "greenhouse" was lightened via the use of thinner door and roof pillars. Doing away with the thick framing that had been a much-criticized feature of Studebaker's bodies since 1953 imparted a much more modern appearance, although most shoppers likely didn't notice.
The Wagonaire featured a novel -- and useful -- sliding rear roof panel.Inside the cars, a completely new instrument panel with full, direct-reading gauges (and no idiot lights) was installed, although the designers were not able to integrate the available air conditioning into the panel; the evaporator and vents were still hung beneath the dash in a space-robbing box. For the ladies, an "Exclusive Beauty Vanity" with a mirror and makeup tray was fitted in the glove compartment on most models.
Aside from the Avanti, the biggest product news for Studebaker in 1963 was the introduction of the novel sliding-roof Wagonaire. Designed by Stevens, the Wagonaire was perhaps the greatest advance in station wagons since the late-1940s introduction of the all-steel body.
Elsewhere in the lineup, the Cruiser was given heavy promotion as a sensibly-sized luxury car. The brochures referred to it as "America's First and Only Limousette." To separate it from the Lark, Studebaker eliminated the "LARK" lettering from the front fenders and added fancier side trim. Inside, buyers could choose luxurious broadcloth upholstery, lending credence to Studebaker's luxury push for the Cruiser.
The Daytona line was expanded for 1963, adding the new Wagonaire to the continuing convertible and hardtop. The former highline Regal trim was pushed down to replace the 1959-62 Deluxe, and the new Custom trim level, which used side trim similar to that used on the 1962 Daytonas, stepped into the Regal's former place. Daytonas received new side trim that started as a narrow molding on the front fenders and widened toward the rear. The basic design of this trim was shared with the Cruiser.
In mid-1963, Studebaker introduced the Standard series, a totally stripped line of Larks in the vein of the 1957-58 Scotsman. While it — like the Cruiser at the other end of the line — was obviously a Lark, it bore no Lark nameplates, just "Studebaker" scripts (first used on 1956 Hawks) on the front fenders. In addition, the Standard, in keeping with its frugal image, carried no side trim, and had a plainer interior with no vanity, just a simple glove box with a lid that opened at the top. Mainly promoted as a fleet vehicle, the Standard offered good value; the two-door sedan carried a base price of only US$1,935. This price was very competitive with other companies' small- and mid-sized cars.
On the engineering front, disc brakes made by Bendix (first offered on the Avanti) were made available; at $97.95, they were a good value and greatly improved the cars' stopping power. In the engine lineup, in addition to the existing six-cylinder and V8 engines of the past, new options were added for the 1963 model year. Unsupercharged "R1" and supercharged "R2" 289 V8s from the Avanti were made available. Buyers choosing those engines late in the model year could also order a "Super Performance Package," which added a host of high-performance goodies aimed at making the cars not only go faster, but handle better. Cars equipped with the package were called "Super Larks."
Unfortunately, though the 1963 models were seen as an extension of the improvements made the previous year, the buying public by this time was looking for more than just a mild change, and sales fell, this time to around 77,000 cars.
1964
1964 Studebaker DaytonaUndeterred by 1963's poor showing, Studebaker's top brass allowed Stevens to give the Lark-based lineup a more extensive (but still inexpensive) restyling for 1964. The Mercedes-like grille of 1962-63 gave way to a full-width, stamped aluminum grille and squared-off headlamp surrounds. Stevens flattened the hood, roofline and trunklid, and reworked the tail panel to incorporate new horizontal taillamps and backup lamps, all the while ingeniously retaining the sculpted quarter panels introduced in 1962, which still suited the new look and reduced by a considerable amount the cost of tooling.
The new look debuted along with the company's plan to phase out the Lark name entirely. The lowest-priced models were renamed Challenger (replacing the 1963-1/2 Standard), while the Commander name (which had last made an appearance in the Studebaker lineup on the last full-size cars in 1958) replaced the Regal trim level. The Daytona series added a four-door sedan (replacing the 1963 Custom four-door), and the Cruiser continued at the top of the line. All models except the Cruiser offered a Wagonaire.
Challenger and Commander models came standard with single headlamps, the first time since 1961 that a Lark-based vehicle offered them. Dual lamps were an extra-cost option.
Early promotional materials referred to the Challenger and Commander as Larks, but aside from Lark emblems on the roof sail panels on Challengers, there was no Lark identification on the cars, as Studebaker replaced the Lark emblems elsewhere on the car with the company's "circle-S" logo.
Inside, the cars were only slightly modified, with minor changes made in upholstery, glovebox opening, and gauge position. The speedometer, which in 1963 had resided in the right-hand "hole" in the gauge cluster, was moved to the center position, with the optional clock or tachometer placed on the right.
End of the line in South Bend
Studebaker worked very hard to establish a high-performance image for the '64 lineup, sending a number of them to the Bonneville Salt Flats to set new production-car speed records. Advertisements played up the powerful R-series engines, disc brakes and the company's position that Studebakers were "different ... by design" from other American cars.
Magazine road test reviews of the new cars were generally positive. One of the more-popular automotive magazines of the day even got to help build the car they would test. Gene Booth, the editor of Car Life magazine, went to South Bend and assisted in building a Daytona hardtop with the full R4 Super Performance Package. This car ended up being the only Studebaker equipped from the factory with the optional 304.5 cubic-inch, dual-quad "R4" engine.
But it all came to naught.
It rapidly became apparent that despite the dramatic styling change, innovative models like the Wagonaire, the high-performance R-series engines and Super Performance Packages (inspired by the Avanti) that were developed with the help of "Mr. Indy 500" Andy Granatelli (who headed Studebaker's Paxton Products and STP divisions), nothing could bring Studebaker's sales out of the doldrums. By the early autumn of 1963, Studebaker's board of directors saw the handwriting on the wall.
The first hint of what was to come involved the slowdown of the South Bend assembly lines. At the start of the model year, the company was building 60 cars per hour. By late October 1963, some 2,500 workers were laid off and the line speed was reduced.
November 1963 presented a "perfect storm" of events that would seal South Bend's fate, from the illness of the company's president to falling sales which only got worse following the assassination of John F. Kennedy. Rumors were spreading that the board of directors and the company's president, Sherwood Egbert, were at odds over the future of the automotive division. The board's opinion was that it was finally time to find a way out of the auto business as the company's non-automotive divisions were profitable, while the auto operation was bleeding the company dry. Egbert, despite being terminally ill with cancer, fought this. However, when Egbert had to undergo further cancer surgery (his third since 1962) that month, the directors took the opportunity to force him out and execute their plan to wind up automotive production.
Although it would by necessity have to be done slowly and methodically, lest the company expose itself to contract lawsuits from angry dealers, the directors quickly put their plan into action. Meeting with the leaders of UAW Local 5, which represented Studebaker's assembly workers, the decision was made to close the South Bend plant and continue production at the company's small Canadian factory in Hamilton, Ontario, which could, it was believed, be operated at a profit.
The closure of the South Bend plant was announced on December 9, 1963, and the final Lark-type car, a Bordeaux Red 1964 Daytona two-door hardtop (originally intended for shipment to a dealer in Pennsylvania), rolled off the assembly line on December 20. This car is now housed at the Studebaker Museum in South Bend.
Canadian production 1964 - 1966
Third generation Production 1965-1966 Assembly Hamilton, Ontario, Canada 1964
After the South Bend closing, production continued at the Studebaker's Canadian plant in Hamilton, Ontario, which was overseen by Gordon Grundy, the president of Studebaker of Canada, Ltd. Grundy was a dedicated Studebaker executive who, like Egbert before him, wanted to see Studebaker continue as a builder of automobiles.
The "second series" Canadian-built '64 lineup wasn't much different from the South Bend offerings; however, the entire Challenger series (along with the Hawk and Avanti) was dropped. Six-cylinder Daytona models that had not previously been offered in the U.S. (but had been available in Canada and export markets) were added to the U.S. lineup.
Another new addition was the Commander Special, which combined the mid-range Commander body with the interior of the sporty Daytona. A good value for the money, it proved mildly popular and would serve as the basis for another model in 1965.
Under the hood, all of the R-series engines were discontinued, although remaining engines continued to be sold by Paxton Products for some time afterward. Engines for the Canadian-built late-1964 models came from South Bend until the end of the model year. When the union contract ended in May 1964, the foundry was closed. Enough engines were completed to build-out the 1964 model run, which ended that summer.
Spotters can distinguish original second-series '64 cars by their solid white steering wheels; cars built in South Bend were built with steering wheels that either matched the interior color or were two-toned with white as the upper and lower color. Also, cars without clocks had a blank plate in the instrument cluster which read "STUDEBAKER CORPORATION" on South Bend cars and "STUDEBAKER OF CANADA" on Hamilton cars.
1965
The Studebaker model lineup was changed little for 1965; indeed, without opening the hood, it is difficult to distinguish them from the 1964 models.
With the end of engine production in South Bend, Studebaker's Hamilton plant no longer had a source of engines. The company was forced to search for an outside supplier. The small engineering staff quickly gathered and thoroughly tested engines from both General Motors and Ford. The Ford engines (basically the Falcon/Fairlane six-cylinder and V-8) would not fit without expensive modifications to the cars, while the GM (Chevrolet designs built by the company's McKinnon Industries subsidiary) engines fit perfectly.
The only hang-up was how to mate the new engines to the Borg-Warner transmissions that the company preferred to continue using.
Fortunately, according the late E.T. Reynolds, a Studebaker engineer, Checker Motors had started using Chevrolet engines in their taxicab and Marathon lines at about the same time that Studebaker began considering doing the same. Like Studebaker, Checker had long used Borg-Warner transmissions, and that company's engineers had created an adapter to mate them to the engines. Checker made its parts available to Studebaker, and the company began purchasing engines from GM for the 1965 model year. The chosen powerplants were basically the same as found in the Chevrolet Chevy II. The Studebaker six was replaced by a 194 cu in (3.2 L) 120 hp (89 kW) six, and the well-known 283 cu in (4.6 L) 195 hp (145 kW) V8 replaced both Studebaker's 259 and 289 engines.
For 1965, the Commander was offered in two- and four-door sedan form along with a Wagonaire. The Cruiser four-door sedan was still available, as was the Daytona Wagonaire. The Daytona convertible, hardtop and four-door sedan models were all discontinued, however. Aside from the Wagonaire, the only other 1965 Daytona was the vinyl-roofed two-door Sports Sedan, which drew its inspiration from the late-1964 Commander Special. All models continued the 1964 design with only minor detail changes, the most significant being that the Commander gained standard quad headlamps, replacing the dual lamps that had been standard the previous year.
Sales, unfortunately, continued to plunge; fewer than 20,000 Studebakers were built in 1965, and some blamed the poor results on Studebaker of Canada's decision to make no year-to-year style changes (a plan that worked well for Volkswagen, but not for a company like Studebaker which had long made annual changes). Others, many Studebaker loyalists included, felt that the GM-powered cars built in Canada were not true Studebakers. The term "Chevybaker" was coined early on for these cars, bringing to mind the "Packardbaker" nickname of the 1957 and 1958 Packards built on the Studebaker President body.
1966
The 1966 Studebakers, advertised as having "The Smart New Look", were slightly restyled, the result of a reversal of the company's previous decision to make no annual model changes. The cars bore a stylish new grille, single headlamps, revised and simplified side trim, luxurious new interiors (even in the cheapest Commander), and other refinements. Even the famous Hawk logo was brought out of retirement, slightly redesigned, and applied to wheelcovers, grilles, and engine identification emblems on the front fenders. The redesign, which was evidently begun by Brooks Stevens, was completed by the Detroit design firm of Marcks Hazelquist Powers.
Bob Marcks, who later worked as a designer and product planner at Chrysler, commented in a 1970s interview that the general feeling shared by both designers and management was that Studebaker's cars needed to project a more upscale image. To do this on Studebaker's limited budget, the designers chose colors and upholstery materials comparable to those seen in Cadillacs and Lincolns, rather than the plainer variety that one might expect in a lower-priced car. The tasteful nylon brocade upholstery with contrasting-color vinyl trim that was standard in the Cruiser particularly reflected this philosophy.
Studebaker's final engineering innovation, flow-through "Refreshaire" ventilation with air extractor vents integrated into the taillamp assemblies, debuted on the 1966models to wide acclaim. Refreshaire virtually eliminated the need for opening the vent windows in the front doors. In fact, the Cruiser, which had, since its 1961 introduction, been equipped with opening rear-door vent windows, lost that feature with the advent of Refreshaire.
Under the hood, a larger 230 cu in (3.8 L) 140 hp (104 kW) six-cylinder engine was added as an option, first available only with an automatic transmission. Later in the model run, however, the bigger six was made available with any of Studebaker's three transmission options.
The only change to the 1966 model lineup was that the Wagonaire was now on its own and thus no longer part of either the Commander or Daytona series. The station wagon bore "Studebaker" nameplates on its front fenders and shared the Commander's grille and exterior trim, but had a Daytona-grade interior. The fixed-roof option returned after a one-year hiatus, and the rear-facing third seat was dropped from the option list.
All of the other models, Commander, Daytona and Cruiser, were continued. The Commander, however, received some notable additional standard equipment in January 1966 as the company began including the Climatizer heater/defroster, windshield washer and other items at no additional cost.
Unfortunately, despite the clever restyling, luxurious interiors, engineering advancements, and added standard equipment, sales dropped once again. Even when compared against 1965's poor numbers, sales in 1966 were minimal. Surprisingly, though, while the Hamilton plant was not turning out many cars, it was — by most accounts — operating at a small profit, thanks to the efforts of Gordon Grundy, who cut costs wherever possible to bring the plant's breakeven point as low as he could.
Grundy's efforts were not enough to satisfy the company's board of directors, however. Most of them had viewed the South Bend shutdown two years earlier as the first step in ending auto production completely, but surviving evidence indicates that they did not inform Gordon Grundy of this. Grundy, who along with his small staff, had been working with Marcks Hazelquist Powers on a facelifted 1967 model, approached the board in early 1966 seeking less than $300,000 in tooling funds (a pittance by Detroit standards) for the job. Much to his dismay, he was told that there would be no 1967 production. The board then moved to close Hamilton as soon as possible, and the last Studebaker car, a Timberline Turquoise Cruiser four-door sedan, was built on March 16, 1966 (some sources claim the car was built on March 17). It was the last of only 8,935 (some sources incorrectly state 8,947) Studebakers built for 1966 and the end of a transportation legacy that stretched back some 114 years.
Final Larks still exist
Studebaker aficionados can take heart that both the last South Bend car and the last Canadian car still exist and are on display at the Studebaker National Museum in South Bend, Indiana.
The final U.S. built Lark-type, the Bordeaux Red 1964 Daytona hardtop mentioned above, was retained by the company instead of being delivered to the Pennsylvania dealer who had ordered it. The car is considered to be the last "new" Studebaker, having only around 30 miles (48 km) on its odometer.
The final Canadian car, a 1966 Cruiser, was driven several thousand miles by a company executive (records indicate that it was built for delivery to the company's Parts and Service Division in South Bend). It was eventually retired to the company's collection and has been restored in recent years to as-new condition.
Special Larks
The Lark's body-on-frame construction made it very easy for custom coachbuilders and designers to create new interpretations of the cars both for Studebaker and for others who wanted something "a little different."
The Frua LarkThe noted Italian coachbuilder and designer Pietro Frua rebodied a very small number of Larks in 1960. Two four-door sedans are known to still exist, but both are in need of extensive restoration. It appears that at least one two-door model was also built, but it is not known if this car still exists. The Frua Larks are notable for their distinctive straight-lined bodies and generous use of glass.
In addition, American designer Brooks Stevens created several special concept cars on the basic Lark chassis. Three of these cars, a four-door sedan with suicide doors, a sliding-roof station wagon (called the Skyview) and a two-door Sceptre sports coupe exist today and are housed in the Studebaker National Museum.
The Lark convertible lent its reinforced X-frame chassis to the Avanti and Brooks Stevens' Excalibur, both of which would be manufactured in limited numbers long after Studebaker was out of the automotive business, although Excalibur switched to a custom-designed chassis when its supply of Studebaker frames ran out. Avanti Motors would continue to use the basic chassis into the early 1980s.
"Lark-types" and other trivia
Although Studebaker phased out the Lark name in 1964, Studebaker collectors and enthusiasts refer to all 1964-66 Studebaker sedans and station wagons as "Lark-types", since the cars are still as much Larks as the 1959-63 models, despite the name changes.
From 1959 to 1961, six-cylinder Larks were identified as "Lark VI" models, while V8-powered cars bore nameplates identifying them as "Lark VIII" models. Novices in the Studebaker hobby sometimes erroneously refer to these cars as "Mark VI" and "Mark VIII" Larks (not to be confused with the Lincolns of the same names).
The early Lark four-door sedan's body was used to create the cab section of the 1960 Studebaker Champ pickup, Studebaker's last "all-new" truck design. A new back cab wall was created, with the front doors, dashboard and front sheetmetal largely unaltered from those of the car. A more "truck-like" grille was added to the Champ, but otherwise the bodies of the 1959-60 Larks and all Champs built from 1960 to 1964 share a great deal of their body components. In fact, some export-market Champs were even built on the long-wheelbase Cruiser chassis instead of the truck chassis. None of these are known to survive, and none were sold in the U.S.
A rear-facing third seat was optional on station wagons from 1959 to 1965. Cars with this option did not come with a spare tire. Instead they came with special "Captive-Air" tires that had an inner lining that allowed the car to be driven even if the outer tire were punctured.
Subscribe to:
Posts (Atom)