Thursday, May 21, 2009

AMC Pacer



The AMC Pacer is a two-door compact automobile produced in the United States by the American Motors Corporation between 1975 and 1980. Its initial design idea was started in 1971. The car's unusual rounded shape with massive glass area greatly contrasted with the mostly boxy, slab-sided models of the era. The Pacer's "jellybean" body style is a readily recognized icon of the 1970s.

Design

AMC's chief stylist Richard A. Teague began work on the Pacer in 1971, anticipating an increase in demand for smaller vehicles through the decade.

Car and Driver magazine noted that "AMC said it was the first car designed from the inside out. Four passengers were positioned with reasonable clearances and then the rest of the car was built around them as compactly as possible."

Designed to appear futuristic, the shape was highly rounded with a huge glass area, and was very unusual for its time. Road & Track magazine described it as "fresh, bold and functional-looking".

Development was under Product Group Vice President Gerald C. Meyers, whose goal was to develop a car that was truly unique: "...everything that we do must distinguish itself as being importantly different than what can be expected from the competition..."

Unique for a comparatively small car, the Pacer was as wide as a full-size American car of the era. Contrary to myth, it was not widened six inches (152.4 mm) to make room for the rear-wheel drive configuration. According to an AMC market study from the early 1970s, front-wheel drive was never considered, although the editor of Road & Track asserted that front-wheel drive, as well as a transverse mid-engined configuration, were among "various mechanical layouts...tossed around by the idea people at AMC", adding that "it's unlikely they ever had much hope of being able to produce anything other than their traditional front engine and rear drive, using components already in production." A rear-engined layout was also explored. 1975 AMC advertising literature proclaimed it as "the first wide small car".

The width was dictated partly by marketing strategy—U.S. drivers were accustomed to large vehicles, and the Pacer's occupants had the impression of being in a larger car—and partly by the fact that AMC's assembly lines were already set up for full-size cars.

Also unique at the time, the passenger door was four inches (101 mm) longer than the driver's. This made passenger loading easier, particularly from the rear seats; and they would also tend to use the safer curb side in countries that drive on the right. Ford used this design element in the 1990s Ford Windstar minivan.

Teague's low-drag design, which predated the fuel crisis and the flood of small foreign imports into the American market, was highly innovative. Its drag coefficient of 0.32 was outstandingly low for a car of its size. Teague even eliminated rain gutters, smoothly blending the tops of the doors into the roof—an aerodynamic detail which, although criticized at the time for allowing rain onto the front seat, has become the norm in today's designs.

The Pacer was also among the first production cars in the U.S. to feature rack-and-pinion steering. The body was designed with the aim that structural lines protected it from hit damages, AMC engineers claimed that they succeeded in more than 50% of the car surface.

In the mid-1970s the U.S. government mandated major safety improvements for the 1980 model year, to include 50-mile-per-hour (80 km/h) front-end crash testing, 25-mile-per-hour (40 km/h) side crash testing and 30-mile-per-hour (48 km/h) rollover testing, as well as installation of bumpers to resist 5-mile-per-hour (8 km/h) impact at the front and 10-mile-per-hour (16 km/h) at the rear. The Pacer was designed to these specifications, and also had laminated safety glass in the windshield.

1975 AMC Pacer base model

General Motors, Ford, and Chrysler persuaded the government that it was not financially viable to modify existing production cars to comply with the new regulations, and that instead each company would be put to the enormous expense of producing new, safety-compliant vehicles. Accordingly the government requirements were reduced, which led to the deletion of several safety features from the production Pacer—for example the roll bar over the passenger compartment, and the bump in the roof that accommodated it. The Pacer's remaining safety features were not strongly advertised, and seldom influenced a potential customer's purchasing decision. The car's extra weight—due in part to the safety equipment and the abundance of heavy glass—hurt fuel economy: production models tested by the United States Environmental Protection Agency (EPA) gave 16 miles per US gallon (15 L/100 km; 19 mpg-imp) in the city, but 26 miles per US gallon (9.0 L/100 km; 31 mpg-imp) or better on the highway (depending on driving habits and transmission), thanks to aerodynamic efficiency.

Originally the car was designed for a Wankel rotary engine. In 1973, AMC signed a licensing agreement with Curtiss-Wright to build Wankels for cars and Jeep-type vehicles. (The agreement also permitted Curtiss-Wright to sell rotaries elsewhere.) Later, AMC decided instead to purchase the engines from General Motors (GM), who were developing them for use in their own cars. However, GM canceled development in 1974 for reasons that included durability issues, the fuel crisis, tooling costs (for the engines and also for a new product line designed around the rotary's ultra-compact dimensions) and the upcoming (late 1970s) U.S. emissions legislation. It was also thought that the high-revving Wankel would not suit Americans accustomed to low revs and high torque.

General Motors's change of plans left the Pacer without an engine. American Motors took a calculated risk and introduced the new model. The company's overcommitment to the project resulted in entrapment with so much money and effort in the car's design. Engineers hastily reconfigured it to accept their existing straight-six engine. This involved a complete redesign of drivetrain and firewall to keep the longer engine within the body dimensions designed for the Wankel, but allowed the Pacer to share many mechanical components with other AMC models.

The "outside of the box" thinking incorporated by AMC in the Pacer as the first "wide, small car" attempted to capture a revolutionary change in marketplace. However, a radical departure from what was accepted by consumers as "good styling" was a risky strategy. Only the largest firms can stick with a radical element until it "grows", and the automaker’s dominance in the marketplace may eventually establish it as a standard feature. However, the styling research axiom no longer applied by the late 1970s that if a car with some controversial styling was liked by at least half of the potential market segment; then chances were good that this feature was a differential advantage for the manufacturer. The AMC Pacer incorporated many controversial styling and design innovations led to its market failure after five model years. American Motors created the Pacer by identifying emerging trends and design technologies, but it faced a small window of opportunity since a product that comes out either too early or too late can fail even if the opportunity was there initially. A further complication was the purchasing dynamics and the Pacer's design was focused on maximizing the internal sence of space, while the market focused on external dimensions. Many of the attributes the Pacer incorporated became the goal of all manufacturers in the two decades that followed.

With an uncommonly wide and short body for a small car, the Pacer’s design is still considered controversial while its powerplants did not contribute to fuel economy. Nevertheless, “the foresight by Teague and AMC was correct” with approaches to meet the evolving U.S. government regulations covering automobiles (such as the Highway Safety Act of 1970 and the new National Highway Traffic Safety Administration).

Production

1978 AMC Pacer station wagon.

Wagon looks more conventional than hatchback

Introduced in showrooms on February 28, 1975, the Pacer was designed to attract buyers of traditional large cars to a smaller package during a time when gasoline prices were projected to rise dramatically. In its first year of production, the Pacer sold well, with 145,528 units. Some reviewers referred to it as a "fishbowl on wheels" or a "jellybean in suspenders" because of its unconventional styling, while some described it as a "cute" car. There was little competition from other American manufacturers, most of whom had been blindsided by the oil crisis. The increased demand for compact, economy vehicles was growing rapidly. However, Pacer sales fell after the first two years, and it was available through the 1980 model year. Similar to its mid-year introduction, on December 3, 1979, production of the Pacer ended at the Kenosha, Wisconsin assembly plant where it had begun five years earlier. A total of 280,000 cars were built. Increasing competition from the Big Three U.S. automakers and the rapid consumer shift to imported cars during the late 1970s are cited as the reasons for this outcome.

The Pacer's unconventional styling was commonly cited in its lack of success. Other concerns included a lack of cargo space when carrying a full load of passengers (because of its short wheelbase). Cargo space could be increased to 29.5 cubic feet (0.84 m3) by folding down the back of the rear seat to form a flat floor. Drivers also cited a lack of power. The Pacer was heavy; Car & Driver wrote, "American Motors had already quoted a curb weight of 2990 lb. for the basic Pacer when we first wrote about the car, and that already seemed quite heavy; but when we weighed the test car (whose air conditioning, automatic transmission, power steering and so forth would not account for the full difference) it registered an astounding 3425 lb.", and the standard 232 cu in (3.8 L) I6, with a single-barrel carburetor and optimized for low emissions (all vehicles at the time carried emissions-reducing devices); was relatively low-powered ("The Pacer comes with either of two AMC inline six-cylinder engines, both producing 100 bhp, but the larger 258-cu-in. unit delivering better mid-range torque"[13]). In 1976, a "High Output" version of the 258cu in (4.2 L) engine was offered, which helped performance at the cost of higher fuel consumption. By the time a 304 cu in (5 L) V8 was offered in 1978, the company had introduced a successful line of "luxury-compact" models (the AMC Concord). Additionally, gasoline prices remained high, limiting demand for V8-powered vehicles.

For increased cargo capacity, a station wagon body style was offered from 1977. The wagon version was only five inches longer (127 mm) and weighed only 76 pounds (34 kg) more than the coupe. It was also a less unusual-looking design with a squared-off back and straight, almost upright, rear side windows. Although front vent windows were optional on all Pacers, the wagon's rear side glass featured vent windows as standard. The broad and rear liftgate opened to a wide, flat cargo area with 47.8 cubic feet (1.35 m3) of space, significantly easing the task of loading cargo. The rear seat also folded flat to form a continuation of the cargo floor. Some wagon models featured simulated wood-grain trim on the lower body sides and the liftgate.

Model designations

1979 AMC Pacer D/L

During the Pacer's production and marketing, the car went from initially being promoted as an economy car, to becoming a small luxury car. The following information details some of the highlights. The "X" Package: A "sporty" edition Pacer. The Pacer X was available from 1975-1978 on the coupe version of the car. The title changed to "Sport" in 1978 and was eliminated after that. The trim package consisted of vinyl bucket seats, sports steering wheel, custom trim, as well as a floor mounted gear shift and front sway bar. On the outside it received exterior chrome features, styled road wheels, and "Pacer X" decals on the doors and other package identification.

The "D/L" Package: A more upscale edition of Pacer, the D/L was available for the entire run of the car becoming the "base" model in 1978. This package was more "luxurious" including, originally, a "Navajo-design" seating fabric and a woodgrain instrument panel as well as a few interior features that were optional without it. The exterior received additional chrome accents, different wheelcovers, and identification badging.

The "Limited": Available in 1979-1980, the Limited model was an elegant farewell for Pacer. Inside, leather seating, extra sound proofing, and deeper-pile carpet (18-oz. vs. the standard 12-oz) was standard, as were many amenities that would have been options: AM radio, power door locks, power windows, and tilt steering wheel, to name a few. The exterior offered many chrome accents, styled road wheels, and exterior "Limited" identification badging.

The "Sundowner": In 1975 only, a Sundowner Pacer was available through AMC dealers in California. This marketing promotion consited of the basic Pacer with a $3,599 suggested retail price. This package included options listing for $300 at no extra cost. In addition to the mandatory California engine emissions controls and state-required bumper guards, the Sundowner package included a "custom interior" featuring Basketry Weave fabric upholstery with coordinated trim on the door panels, remote control exterior mirror, rear window washer and wiper, styled road wheels with white wall tires, and a roof rack.

The "Levi's" Package: Attempting to capitalize on the popularity of the Levi's Gremlin and Hornet, AMC introduced a Levi's Pacer for 1977. This option added blue denim-like upholstery and door panel trim, with small "Levi's" tags on both front seats. However missing were the traditional copper buttons found on the other AMC Levi's seating. The package also included a "Levi's" logo sticker for each front fender. It could be combined with the Pacer "X" package. Not well promoted, the Levi's Pacer did not sell in large numbers and was gone for the 1978 model year.

Carl Green Enterprises (CGE) Pacers: Numerous Pacers were modified by Carl Green, automobile designer. These cars included 401 cu in (6.6 L) AMC V8 engines, as well as flares, air dams, and wings. The custom cars cars appeared in magazines such as Hot Rod,Popular Hot Rodding, and Car & Driver. Carl Green also built two AMC Pacer pace cars for B.F. Goodrich to campaign in the International Motor Sports Association circuit, as well as provided body kits for Amos Johnson's Team Highball racecars.

All Pacers without the optional vinyl roof trim could be finished in several unique two-tone paint combinations that included front and rear body side scuff molding extensions. However, the top and bottom two-tone treatment was changed in 1977, to an "up and over the roof" accent paint scheme for the duration of production.

1979-1980 saw a hood ornament and center chrome strip down the hood. Power door locks were available in 1978; however it would be 1979 beforepower windows would join the option list.

International markets

Europe

French magazine advertisement from 1975.

AMC Pacer in Amsterdam

American Motors exported the Pacer to several European nations. The AMC distributor in Paris France, Jean-Charles, compared the rounded body of the new Pacer to another attractive rear-end shape in its magazine advertisements. Cars exported to Europe were available in higher trim levels. According to some reports, the Pacer sold well in Europe and even Brigitte Bardot is said to have promoted the car in Paris.

The level of current European interest in Pacers is indicated by the number of European nations listed in the AMC Pacer Registry, the members' cars in the Swedish AMC/Rambler Society, a German Pacer enthusiast Internet site, and the fact that a former AMC dealer in Germany that stocked an inventory of original parts as recently as the early 2000s. A private museum in the Netherlands exhibits a Pacer wagon.

United Kingdom

AMC Pacer in UK

Unlike AMC's other models, the Pacer was only available with left-hand drive. The British importer for the Pacer converted the car from left-hand to right-hand drive by leaving the majority of the steering gear on the left-hand side of the car, and running a chain-drive behind the dashboard from the steering wheel (now on the right-hand side) to the top of the steering column. However, the car retained its unequal-length doors, designed for LHD markets, meaning that in the UK the longer door was on the driver's side, leaving the passengers to use the smaller door, which "in the typically confined British parking spot was virtually impossible." The Pacer was wider than a Rolls-Royce Silver Shadow and slightly longer than the then-current Ford Cortina.

The car was adversely reviewed by the motoring press and AMC soon stopped importing it.

Mexico

The Pacer was produced in Mexico by VehĂ­culos Automotores Mexicanos (VAM) starting in 1976. The cars came with different engines, interiors, and other components because vehicles made in Mexico had to have at least 50% locally sourced parts. The engine was an AMC design, but modified and built by VAM. A unique to Mexico 282 cu in (4.62 L) I6 engine was standard. It was designed to cope with low octane fuel and high altitudes. This engine featured dished pistons with a 3.909-inch (99.3 mm) bore and 3.894-inch (98.9 mm) stroke, as well as a unique head and exhaust porting design. The V8 engine was not available in Mexico.

All Pacers built by VAM came with the following standard equipment: power disk brakes, power steering, handling package, slot wheels with ER78x14 radial tires, reclining front seats, and a radio. Only the coupe model was available. The Mexican Pacers also had different interior trim and seats that featured high-design upholstery that was not available in the U.S. models. For 1979, a total of 250 luxury and performance "Limited edition X" models were built using a modified 282 six-cylinder with an automatic transmission, air conditioning, sunroof, as well as other options.

Opinions

Magazines and newspapers

In 1975, the AMC Pacer was sleek and audacious; unlike anything else on the road and it looked like the car of the future. "The automotive press loved it."

The February 1975 issue of Motor Trend magazine called "it the most revolutionary American car in 15 years" and wrote, "Suddenly, it's 1980" recalling the famous Forward Look slogan.

Reviewers were positive about the Pacer's styling, and Small Cars magazine described the press preview that "admiration was an obvious reaction...the knowledgeable product writers knew without being told that they were privileged to be there to see something new in automobile design." Michael Lamm, writing in Popular Mechanics, said that with its "very modern styling, ample power and generous interior" he felt it was "more car" than "the Mustang II or "GM’s sporty compacts (Monza, Skyhawk/Starfire)", and that its performance felt "strong—certainly on a par with most V8s."

Automotive journalist and author Don Sherman wrote in the February 1975 issue of Car and Driver that it was "our first real urban transporter...There is, of course, the chance of monumental failure; it might be another Tucker ahead of its time or a pariah like the Marlin. But...with its high priority on comfortable and efficient travel and absence of Mach 2 styling, [it] at least seems right for the current state of duress. Consider this bold offering from AMC a test: Are we buying cars for transportation yet, or are they still social props?"

Road & Track magazine's April 1975 road test review described the Pacer's appearance as "bold, clean and unique...even when it's going 60 mph is looks as if it's standing still..." but noted that, even with the test car's optional front disc brakes, "in the usual panic-stop tests...our driver had one of his most anxious moments ever as the Pacer screeched, skidded and demanded expert attention at the steering wheel to keep from going altogether out of control. The histrionics are reflected in long stopping distances from highway speeds... [The car’s] engineering—old-fashioned and unimaginative in the extreme—does not match the perky design", which the magazine declared "most attractive to look at and pleasant to sit in."

In a follow up road test in August 1976, Motor Trend wrote: "Since its introduction in January of 1975, we have been quite smitten with AMC’s Pacer." Their only major gripes were the lackadaisical performance and the absence of a 4-speed transmission. A 2-barrel carburetor was offered on the larger six at the end of 1975, as well as a 4-speed manual, but the testers noted "the 2-bbl Pacer was faster than the 1-bbl car by a fair margin, it did not feel faster" (author's emphasis). Motor Trend described that: "Even with its compact exterior dimensions, the Pacer is one of the most comfortable 4-passenger cars around...The wide bucket seats were firm, but very comfortable...Front passenger leg room is extraordinary even with the seat racked well forward, and the rear seat leg room exceeds such full-sizers as the Buick Riviera and Continental Mark IV."

The Pacer received a facelift and an optional V8 engine in 1978, but retained the heavy-duty crash protection making its body bulkier and heavier than it would otherwise have been. By this point, the luster wore off the unique design and the press began badmouthing the Pacer's lack of power and performance as more sophisticated competitors were introduced.

The British press was critical with the cover of The Motor, a weekly automobile magazine, announced: "We test the Pacer - and wish we hadn't."

In 2006, British motoring journalist and author Martin Buckley wrote in The Independent newspaper that "[t]he Pacer looked horrible, drove badly and ate money." Buckley said that its problems "really stemmed from the fact that the Pacer was the issue of AMC (American Motors Corporation), by far the weakest of the Detroit producers," and that it "might have had more credibility as the all-American answer to the invading hordes had it not been powered by a 3.8-litre straight six engine that could barely push its quivering bulk to 90 mph on an emissions-strangled 95 bhp while averaging 18 mpg or less." He added that the weight of the Pacer’s "boat anchor of a power unit", which was "[t]aken from the Jeep", was so great that it "broke the steering on early Pacers." (The AMC 232 was brand new design in 1964 and became known for its longevity and durability. It was standard in 1972-1978 Jeep CJs and 1965-1970 J-series pickups and Wagoneers.) Buckley concluded that the Pacer was "so uniformly inept in almost all respects that it has passed into folklore and become perversely ‘cool’," and that its "cult following" in America "proves that some Americans do have a sense of irony."

In the latter respect, the Englishman's view is shared by American automotive journalist Marco R. della Cavo, writing in USA Today in 2002: "[Pacer owners] love that their cars often draw incredulous guffaws. You can’t say these folks don’t have a sense of humor."







Books

In The Ultimate Classic Car Book motoring expert, TV presenter and 2004 Motoring Journalist of the Year Quentin Willson writes: "Who will ever forget the...AMC Pacer?...truly awful...painted in violent hues, laden with safety devices and strangled by emission pipery."

The car also appears in several humorously-written opinion-based books of "worst cars", including:

The World’s Worst Cars.
The Worst Cars Ever Sold.
Lemon!.
Automotive Atrocities! The Cars We Love to Hate, whose cover the Pacer graces.
Crap Cars. The author, a BBC Top Gear scriptwriter and Evo magazine journalist, rates the Pacer the third worst car out of 50.

Internet

The Pacer features in several lists solicited from the general public and published online, e.g.:

MSNBC.com's 2005 "least-loved American autos".
Time.com's 2007 "50 Worst Cars of All Time".
"The Most Questionable Car Designs of All Time", a 2007 non-scientific survey of policyholders with a major collector-car insurance company.

Collectibility

Now old enough to be a "classic car", the Pacer has come to be regarded in some quarters as a 1970s design icon. (According to Business Week magazine the 1970s were "infamous for disco, Watergate and some of the ugliest cars ever.")

Nevertheless, in spite of their bad reputations, cars of the 1970s era such as the Pacer are becoming collectors' items. Business Week reported that the rising values of so-called "nerd cars" - ugly 1970s-era cars - prompted the CEO of a major collector-car insurance company to buy a Pacer which has "inexplicably appreciated substantially beyond the $2,300 that he paid for it in 2004." In 2002 he said: "In what can sometimes be a sea of automotive sameness, the AMC Pacer continues to turn heads even today", and he put the value of a "mint Pacer" at "between $4000 and $6000", saying that "the increased value is fueled solely by the heart. This trend is all about a fascination with '70s things almost because they were so bad." (Author's emphasis.)

The Pacer has been described as one of the formerly unloved cars from the 1970s that are enjoying a resurgence in both collectibility and auto restoration — especially among fans of cars from that era. The Pacer is one of several 1970s cars that were always thought of as cheap vehicles; therefore they were poorly maintained, which reduced their life expectancy. Also the heavy engines used in the car put more load on the front suspension than intended, which caused the rack & pinion steering to fail frequently on Pacers built in 1975.

One longtime collector-car expert says you will pay just about the same, around $20,000, for a complete restoration, whether it’s on a $1,000 1978 AMC Pacer or a $5,000 1969 Chevrolet Camaro. When restored, the value of the Pacer may be about $4,000, compared with the Camaro’s $25,000.

Today the Pacer's originality, as well as its deficiencies, are appreciated, if not loved, by car hobbyists and serious collectors alike.

Ownership support

There are many active AMC car clubs that welcome Pacers. Pacers share the drivetrain as well as other parts and components with AMC models, while new old stock (NOS), used, and reproduction parts are available from vendors specializing in AMC vehicles.

External links

High, Wide, and Handsome:
The AMC Pacer
Classic American magazine (UK) Pacer article (Internet Archive copy)
AMC Pacer specifications
AMC Pacer at the Internet Movie Cars Database

Wednesday, May 20, 2009

AMC Ambassador

1958 Ambassador

The Ambassador was the top-line automobile produced by the American Motors Corporation (AMC) from 1958 until 1974. The vehicle was known as the AMC Ambassador, Ambassador V-8 by Rambler, and Rambler Ambassador at various times during its tenure in production. Previously, the name Ambassador had applied to Nash's "senior" full-size cars. The Ambassador nameplate was used continuously from 1927 until 1974 (the name being a top-level trim line from 1927-31); at the time it was discontinued, Ambassador was the longest continuously used nameplate in automotive history. All Ambassador models were built in Kenosha, Wisconsin.

1973 Ambassador Brougham Sedan with 401 cu in (6.6 L) V8

The Ambassador logo from 1958 to 1961

Prologue

Following George W. Mason's unexpected death in the fall of 1954, George Romney (whom Mason had been grooming as his eventual successor), succeeded him as President and CEO of the newly-formed American Motors. Romney recognized that to be successful in the postwar marketplace, an automobile manufacturer would have to be able to produce and sell cars in sufficient volume to amortize the high cost of tooling. Toward that end, he set out to increase AMC's market share with its Rambler models that were selling in market segment in which the Big Three (General Motors, Ford Motor Company, and Chrysler) did not yet compete. While development of a redesigned 1958 Nash Ambassador, based on a stretched and reskinned 1956 Rambler body, was almost complete, AMC's designers were also working on a retrimmed Hudson equivalent, called Rebel, to offer Hudson dealers.

However, as sales of the large-sized Nash Ambassador and Hudson Hornet models slowed, it became clear to Romney that consumer confidence in the historic Nash and Hudson nameplates had collapsed. Reluctantly, he decided that 1957 would be the end of both nameplates, and the company would concentrate on the new Rambler line, which was registered as a separate marque for 1957

1958-59



First generation

Also called

Ambassador V8 By Rambler

Production 1958-1959

Body style(s)

4-door sedan
4-door station wagon (including hardtop models)

Engine(s) 327 cu in (5.4 L) V8

Transmission(s) 3-speed automatic

Wheelbase 117 in (2,972 mm)

1958

American Motors planned to produce a stretched a 117-inch (2,972 mm) wheelbase version of the Rambler platform for Nash dealers to be the new Nash Ambassador, and another for Hudson dealers. Shortly before committing to production of the new long wheelbase versions of the Hudson and the Nash, CEO Romney decided to abandon the Nash and Hudson brands.

Despite the fact that the Nash and Hudson names were canceled, work on the car itself continued, and American Motors introduced debuted in the fall of 1957, the "Ambassador V-8 by Rambler" on a 117-inch (2,972 mm) wheelbase. This was first mid-sized luxury performance offering from an American manufacturer. Its features included a 327 cu in (5.4 L) V8 (equipped with a 4-barrel carburetor and dual exhausts and rated at 270 horsepower (201 kW) and 360 foot-pounds force (490 N·m) of torque) mated to a BorgWarner supplied 3-speed automatic transmission with push button gear selection. The Ambassador was available in a body style exclusive to its line, a pillarless hardtop “Cross Country” station wagon. The 1958 Ambassador was offered in a single high level trim level and came equipped with such luxury items as electric clock, twin front and rear ashtrays, Nash tradition "deep coil" spring suspension front and rear, split back reclining front seats that fold down into a bed, as well as upscale fabrics for the interior.

Management had found that the public associated the Rambler name with small economy cars, and did not want the upscale nature of the new Ambassador to be so closely associated with Rambler's favorable, but economical image. Therefore, a decision was made that the larger Ambassador would be marketed as the Ambassador V-8 by Rambler in order to identify it with the Rambler name's burgeoning success, but to indicate an air of exclusivity by showing it to be a different kind of vehicle. However, the car wore "Rambler Ambassador" badges on its front fenders.

The 1958 Ambassador is a substantially longer car than the 108-inch (2,743 mm) wheelbase Rambler Six and Rebel V8, although both lines shared the same basic body, styling, and visual cues. However, all of the Ambassador's extra nine inches (229 mm) of wheelbase (and, therefore, overall length) were added ahead of the cowl, meaning that the passenger compartment had the same volume as the smaller Ramblers. The Ambassadors came with plusher interior and exterior trims while the front end incorporated the Rebel "V-Line" grille from the prototype Hudson model. Through effective market segmentation, the Ambassador was positioned to compete with the larger models offered by other automakers.

Model identification was located on the car's front fenders and deck lid. Super trim level Ambassadors featured painted side trim in a color that complemented the body color; Custom models featured a silver anodized aluminum panel on sedans and vinyl woodgrain decals on station wagons. Ambassador body styles included a four-door sedan and a hardtop sedan, a four-door pillared station wagon, and the aforementioned hardtop station wagon, a body style that first saw duty as an industry first in the 1956 Nash and Hudson Rambler line, on which all of the 1958 Ramblers were based.

The Ambassador had an excellent power to weight ratio for its time and provided spirited performance with 0 to 60 mph (0 to 97 km/h) times of just under 10 seconds and low 17-second times through a quarter-mile (402 m) dragstrip. It could be equipped with a limited slip differential, as well as power brakes, power steering, power windows, and air conditioning. Numerous safety features came standard and lap seat belts were optional.

1959

For 1959, the Ambassador received a revised grille, side trim, redesigned rear door skins and tailfins, as well as a stainless steel covered “C” pillar sporting the Ambassador emblem of an eagle’s head over an American Flag shield.

1960-61

1960



Second generation

Also called

Rambler Ambassador

Production 1960-1961

Body style(s)

4-door sedan
4-door station wagon (including hardtop models)

Engine(s) 327 cu in (5.4 L) V8

Wheelbase 117 in (2,972 mm)

1960 saw the Ambassador lineup totally reskinned, wearing new fenders, hood, deck lid, door skins, roofline, grille, taillights, bumpers, windshield, and backlight. Significant were the lower hood line, lower windshield cowl, simplified side trim, egg crate grill, while the tailfins were reduced in height and were canted to either side making for a modern and integrated appearance. The overall effect was rather fresh, as the new roof had a lower, lighter look, to complement the lower fins and grille.

All Ambassadors came equipped with the American Motors 327 cu in (5.4 L) V8, but for the first time it was available in two versions. First was the original 270 hp (200 kW), 360-foot-pound-force (490 N·m) of torque, performance version equipped with the 4-barrel carburetor and a 9.7:1 compression ratio, which required premium fuel, and a second economy version running on regular gasoline making 250 hp (190 kW), 340-foot-pound-force (460 N·m) of torque, equipped with a 2-barrel carburetor and an 8.7:1 compression ratio.

Ambassadors now came with a unique compound wrap around windshield that cut into the roof, and abandoned the “dog leg” protrusion. This improved visibility, did away with the “knee knocker” dog leg, and resulted in an even stiffer unitized structure. The 1960 Ambassador had a low cowl and could be had in either Custom or Super trim levels. All 1960 Ambassadors came with a new instrument cluster under a padded cowl, as well as illuminated controls for lights, wipers, fan, and defrost functions. The 1960 Ambassadors continued with an enclosed drive shaft (torque tube) and coil springs at all four corners, although the suspension was revised resulting in even better handling. The top of the line Ambassadors came equipped with individual “airliner” front seats that now sported even more luxurious fabrics than in previous years.

As a luxurious mid-size car, the 1960 Ambassador came in 4-door sedan, 4-door pillarless hardtop, 4-door station wagon, and a 4-door pillarless (hardtop) station wagon. Equipped with the 270 horsepower 327 cu in V8 could reach 60 miles per hour (97 km/h) in just over 9 seconds and pass the quarter mile in 17 seconds.

1961

1961 Rambler Ambassador sedan from the rear

In 1961, however, the Ambassador received an unusual new front-end styling that was overseen by AMC's in-house design department headed by Edmund Anderson. The new face consisted of a trapezoidal grille and headlights that floated in a body-colored panel, while the front fenders arched downward and forward of the leading edge of the hood. Different from anything else on the market, AMC's marketing department promoted the look as "European." While the new look was meant to distinguish the Ambassador from the lower-priced Ramblers, it was neither a consumer success nor well received in the automotive press. Overall sales fell as the entire industry was experiencing a recession. The hardtop sedan and wagon models did not return for 1961.

1962

Third generation

Also called

Rambler Ambassador

Production 1962

Body style(s)

4-door sedan
4-door station wagon

Engine(s) 327 cu in (5.4 L) V8

Wheelbase 108 in (2,743 mm)

By 1962, the Ambassador's body shell was in its seventh season on the market. And while Rambler sales had been good enough for third place in industry sales (behind Chevrolet and Ford), AMC's management was working on a revolutionary and somewhat costly design set to debut for the 1963 model year. In the meantime, American Motors needed to save money, and since the Ambassador's sales had fallen in 1961, it was decided that the car would be downsized for 1962 to share its body, windshield and 108-inch (2,743 mm) wheelbase with its Classic line mate. Accordingly, the car was marketed as a Rambler Ambassador.

The 1962 Ambassador received a new front end, which was very similar to the 1961-62 Classic's, but with a crosshatch grille, recessed center section, and Ambassador lettering. New, rectangular taillights were seen at the ends of restyled rear fenders, which lost their fins entirely. Exterior trim was reshuffled, and a new 2-door pillared sedan debuted. A new '400' trim line was added at the top of the line, with Super and Custom models remaining. The Ambassador offered even more luxurious interiors, perhaps to make up for the fact that it now shared its wheelbase with the Rambler Classic. The 400 could be had with vinyl bucket seats, headrests, and color coordinated shag carpets.

The only available engine was AMC's 327 cu in (5.4 L) OHV V8, in either the regular fuel, 2-barrel carburetor and 8.7:1 compression ratio, 250 hp (190 kW) version or the premium gasoline, 4-barrel version with 9.7:1 compression ratio, 270 hp (200 kW) version. The 1962 Ambassador came with a dual chamber master brake cylinder that separated the front and rear brakes so that in the event of the failure of one chamber some braking function would remain. The 1962 also came equipped with Walker flow-through mufflers. The 108-inch (2,743 mm) wheelbase 1962 Ambassador was lighter than its 117-inch (2,972 mm) wheelbase predecessors and when equipped with the 270 horsepower 327 CID V8, it was a spirited performer.

1963-64

Fourth generation

Also called

Rambler Ambassador

Production 1963-1964

Body style(s)

4-door sedan
4-door station wagon
2-door coupe

Engine(s)

287 cu in (4.7 L) V8
327 cu in (5.4 L) V8

Wheelbase 112 in (2,845 mm)

1963

In 1962 Romney left AMC to run for Governor of Michigan, a position that he won. Back at AMC, a completely redesigned Rambler lineup appeared. The new cars continued Romney's philosophy that Rambler's best chance for survival lay in smaller cars that had a high degree of interchangeability in parts to keep tooling costs and production complexity to a minimum. The completely redesigned Ambassador lineup was introduced with this philosophy in mind for the 1963 model year.

Designed by Edmund Anderson and Richard Teague, the 1963 Ambassador's shape was much tighter, cleaner, and smoother, with almost all of its parts interchangeable between it and the new Classic. Wheelbase was increased to 112 inches (2,845 mm), while overall length remained similar. The new car was rather innovative, as the company engineered a revolutionary new way to stamp bodies, which would allow for door openings to be made of two stampings, instead of multiple smaller pieces which would be welded together, as had been industry practice. The new door stamping design greatly reduced production complexity, ensured higher quality fit and finish, and that bodies would be less beholden to rattles and leaks over time.

Curved side glass and push-button door handles were new and costly upgrades, but contributed to the new Rambler's handsome, elegant, and modern Mercedes-like styling, by adding greater elegance in detail. The front end drew slight controversy, due to its forward-thrusting upper and lower ends and vertical bar "electric shaver" chrome grille insert. The Ambassador's grille was differentiated from the Classic's grille by its use of the Ambassador name in script in the small vertical area between the upper and lower grille sections. Round quad headlights were slightly recessed in chrome bezels mounted side-by-side within the grille at its outermost edges.

Ambassadors once again came in 2-door coupe, 4-door sedan, and 4-door wagon body styles, but new trim lines debuted. 880 was the Ambassador's base trim line, replacing the previous year's Super, while uplevel 990 trim replaced the Custom and 400.

The new Ambassador retained V8 engines until mid model year. The new AMC CEO, Roy Abernethy, ordered that the smaller 287 cu in (4.7 L) V8 engine be installed in Classics at midyear, so that AMC's standard intermediate-sized car could more directly compete with its GM and Ford rivals, all of which had been available with V8engines since 1961 and 1962, respectively.

Sales were brisk, and the redesign was billed a success, with Motor Trend Magazine bestowing Car of the Year status on the entire 1963 Rambler line, including the Ambassador.

1964

The 1964 model year introduced minor trim changes and new options. The "electric-shaver" grille on the 1963 model was replaced with a flush-mounted design, and the engine and transmission options were widened. A two-door hardtop body style called 990-H was added for the first time since 1957. Base 880 models were dropped from the line, and the Ambassador took on the trusty 327 cu in (5.4 L) V8 as its standard engine again.

1965-66

Fifth generation

1965 Rambler Ambassador 990 hardtop

Also called

Rambler Ambassador

Production 1965-1966

Body style(s)

4-door sedan
4-door station wagon
2-door coupe
2-door convertible

Engine(s)

232 cu in (3.8 L) I6
287 cu in (4.7 L) V8
327 cu in (5.4 L) V8

Transmission(s)

3-speed manual
3-speed with overdrive
"Twin-Stick" on console (1965)
4-speed manual (1966)
3-speed automatic
3-speed “Shift-Command” on console

Wheelbase 114 in (2,896 mm)

1965

No matter how much success the new Ramblers achieved in the marketplace, Roy Abernethy was not completely satisfied. Using the experience he gained as an outstanding salesman as a guide, Abernethy closely looked at the direction that American Motors' competition was going and decided that the company would be much more successful if its products competed more directly with the Big Three. He would achieve this by pushing all AMC vehicles further upmarket among the various market segments, shaking off the company's economy car image, and offering vehicles once again in all three major American car size classes: compact, intermediate, and full-size. The American and Classic were strong competitors in the former two segments, so for the 1965 model year, he set his sights on turning the Ambassador into a proper full-size car by stretching the Classic's body and wheelbase and giving it much different styling. The general sizes of automobiles at that time were based on industry standard wheelbase lengths, rather than on the vehicle's interior and cargo space. The 1965 Ambassador represented a fundamental shift in corporate ideology, a shift away from primarily fuel-efficient vehicles, to bigger, faster, and potentially more profitable cars.

Despite the fact that the Ambassador rode the same platform as its 1963-64 forebears, the 1965 models looked all-new. American Motors' designer Richard A. Teague styled the 1965 Ambassador with panache and gave the car an overall integrated look. Motor Trend magazine agreed, calling it a "strikingly handsome automobile." Built on a 116-inch (2,946 mm) wheelbase, four inches (102 mm) longer than the Classic, Teague extended the beltline level from the stacked quad headlights to the vertical taillights. The new Ambassadors were as attractive as anything built by AMC's Detroit-based competitors, and with a list price of around $3,000, few could quibble about the cost of ownership.

The Ambassador received longer, squared-off rear fenders with vertical wrap-around taillights, taller decklid, squared off rear bumper mounted low, and squarer rear wheel arches. At the front, the Ambassador again sparked minor controversy with its new vertically stacked quad headlights, which were slightly recessed in their bezels, as they flanked an all-new horizontal bar grille. This new wall-to-wall grille projected forward, horizontally, in the center, to create an effect somewhat opposite to 1963's grille treatment. The front end design provided a bold, rugged appearance.

Once again, the Ambassador’s entire extra wheelbase was ahead of the cowl, meaning that interior volume was the same as the intermediate sized Classic. Another new body style debuted in the Ambassador lineup for 1965: an attractive new convertible offered as part of the 990 series. This was the first time a convertible was offered in the Ambassador line since 1948.

Ambassadors also saw an expanded list of trim lines, convenience options, and engine choices. The 990 and 990-H models were back, while 880 models were the new economy leaders in the 1965 Ambassador line, but even the $2512 price for the two-door sedan was not attractive compared to the models with better trim, buckets seats, and special interiors. Ambassadors came standard with AMC's new 232 cu in (3.8 L) Inline-6 engine, which was the first time since 1956 that an Ambassador was available with six cylinders. Far more popular in the Ambassador, however, were the two time-tested 287 cu in (4.7 L) and 327 cu in (5.4 L) AMC V8 engines.

American Motors' management decided that the Ambassador could once again accept a standard six-cylinder engine, since its full-size competitors (e.g. Bel Air and Impala, Ford Custom 500 and Galaxie, as well as Plymouth Fury) came with six-cylinder engines as standard equipment. They therefore appealed to a wider range of customers than the Ambassador was getting. Also, since the Classic was now smaller and styled differently, the Ambassador six-cylinder would not threaten to cannibalize Classic 6 sales, which were the company's sales volume leaders. The changes were on target as sales of the repositioned Ambassador more than tripled.

Motor Trend magazine tested an Ambassador convertible with a Twin-Stick overdrive transmission and found it commendably economical, averaging 16.4 mpg-US (14.3 L/100 km; 19.7 mpg-imp) over 1,000 miles (1,600 km) run, and noting that ... "Traveling comfort was the Ambassador's biggest selling point, along with its exceptionally powerful Bendix duo-servo drum brakes ...With the thin bucket seats that recline, driver and passengers can enjoy a high degree of riding comfort... Many passers-by commented on the car's good looks... Our summary: a nice, comfortable, quiet, well built family automobile that rather neglects the performance market."

1966

1966 hardtops featured a formal roof design - DPL model

1966 AMC Ambassador 990 convertible

For 1966, minor changes greeted the Ambassador range, but they were meaningful. The V-shaped horizontal louver spanned unbroken between the headlamps and the effect was continued with twin rectangular trim pieces attached to the side of the front fenders at their leading edges by the headlamps. The effect was repeated in the new vertical wraparound taillamps with the top-line models receiving a twin set of horizontal ribbed moldings across the back of the trunk lid that simulated the look of the front grille. Hardtop coupes received a redesigned roofline that was angular in appearance with an angle cut rear side windows and rectangular rear window. The backlight no longer curved and wrapped slightly around the C pillars. The changes made for a more "formal" look that was popular at the time. The station wagons also received a new roof (that did not have as pronounced dip over the rear cargo area) as well as a redesigned tailgate. A band of simulated wood trim of the sides was optional on the wagons.

The 880 served as the base model with the two-door sedan at $2,404 was the price leader and the poorest seller. The more popular and better trimmed 990 models were available in sedan, wagon, hardtop, and convertible versions.[8] A new luxury DPL (short for "Diplomat") hardtop coupe debuted at the top of the range. The DPL came standard with reclining bucket seats and was available with luxury features like a vinyl roof, wire wheel covers, as well as a special interior trim and houndstooth fabric that included throw pillows to give the Ambassador a more luxurious air so that it might compete with the new Plymouth VIP, Ford LTD, and Chevrolet Caprice. The 232 cu in (3.8 L) I6, as well as the 287 cu in (4.7 L) and 327cu in (5.4 L) V8s remained in the line, but transmission selections now included a new console mounted four-speed manual. Most Ambassadors continued to be ordered with automatic transmissions.

Motor Trend magazine tested a 1966 DPL equipped with a 327 engine that "definitely has snap we hadn't felt before" and even with an automatic transmission experienced "healthy wheelspin from both rear wheels [because of the Twin-Grip limited slip differential]... Subtle changes in this year's suspension, which include longer shocks and different springs, have a pronounced effect on the way the car feels and handles. Most welcome is the improved steering response. The car has a new feet-on-the-ground feeling, and body lean seems to have been reduced. The ride remains very good... As before, the interior's the outstanding feature of the Ambassador. Its quality is such that other luxury cars, even higher priced ones, could well imitate it..."

Perhaps the biggest change, however, was that the Ambassador lost its historic Rambler nameplate, as the car was now marketed as the "American Motors Ambassador". Abernethy was again responsible for this marketing move, as he attempted to move the stylish new Ambassador even further upmarket. To him, that meant that the Rambler name, and its economy car image would be eschewed to give the car a clean slate in a market that was turning away from economy and toward V8 performance. The evidence suggests that Abernethy was on the right track with moving the Ambassador upscale to compete with other manufacturers' luxury models as sales of the AMC's flagship jumped from 18,647 in 1964 to over 64,000 in 1965, and then in 1966 they went to more than 71,000. Although the Ambassador may have accounted for a mere fraction of total passenger car sales in the U.S., but it was an important first step in trying to bring the AMC's products in tune with what the consumer of the day really wanted.

1967-1968

Sixth generation



Production 1967-1968

Body style(s)

4-door sedan
4-door station wagon
2-door coupe
2-door convertible

Engine(s)

232 cu in (3.8 L) I6
290 cu in (4.8 L) V8
343 cu in (5.6 L) V8
390 cu in (6.4 L) V8

Transmission(s)

3-speed manual
3-speed with overdrive
4-speed manual
3-speed automatic
3-speed “Shift-Command” on console

Wheelbase 114 in (2,896 mm)

1967

In 1967, AMC introduced a completely restyled Ambassador, now on a 118-inch (2,997 mm) wheelbase. Once again, it was four inches (102 mm) longer than the new Rambler Rebel's 114-inch (2,896 mm) wheelbase. The Ambassador was positioned as a "luxury intermediate", but had as much interior space as other full-size cars from Ford or GM. The convertible was offered again - this time in DPL trim - for 1967; but it would be the final year with only 1,260 built. It was unique with a new "split stack" folding mechanism that did not intrude into the backseat area. Also in 1967, AMC shifted its fastback Rambler Marlin (rechristened, like the Ambassador, as the American Motors Marlin in 1966) to the longer Ambassador chassis and gave it the Ambassador's front end to harmonize with its longer restyled body.

The car once again looked completely new, with a more rounded appearance that sported sweeping rooflines, "coke-bottle" fenders, greater glass area, and a recessed grille that bowed forward less than that of the 1965-66 models. Taillights were wider, rectangular, and divided by one central vertical bar. The 880 two-door sedans sported the identical roofline as the hardtops, but had slim B-pillars that gave them a more open-air coupe appearance.

AMC's long-lived 327 CID V8 was finally replaced by an all-new 343 cu in (5.6 L), which was based on the 290 cu in (4.8 L) V8 that debuted for 1966 in the Rambler American. With a 4-barrel carburetor and dual exhaust, the 343 V8 produced 280 bhp (210 kW).

Unfortunately, sales of the redesigned models were disappointing, due to customer confusion caused by the entire company's abrupt upmarket push, which seemed uncomfortably "me too" to the traditional Big Three customers and they also alienated American Motors' loyal buyer base. Abernethy's ideas weren't working, and instead resulted in a new round of financial problems for American Motors. As a result, Abernathy was released from AMC by its Board of Directors later that year, and was replaced by William V. Luneberg and Roy D. Chapin, Jr.

1968

For 1968, a new SST trim line was placed above the now mid-line DPL trim for the Ambassador. AMC, which had been a pioneer in the field of air conditioning through its Kelvinator refrigerator division, decided with the advice of marketing executive Mary Wells Lawrence to add greater market distinction to the Ambassador line by making air conditioning standard equipment. This was the first time any volume car manufacturer had done so, something that even Cadillac and Lincoln had not offered on their luxury cars - some costing more than twice as much as Ambassador. While all Ambassadors came with air conditioning as standard, consumers could order the car without air as a "delete option" and to decrease the base price if they so desired. As AMC pointed out in their advertising campaign for the Ambassador, the only other cars that offered air conditioning as standard equipment in 1968 were Rolls-Royce and various sports car manufacturers.

Due to slow sales, both the convertible and pillared coupe models were dropped from the line, leaving the 990 hardtop coupe and sedan, DPL hardtop coupe, sedan, and wagon, and new SST hardtop coupe and sedan in the line to soldier on. Marlins were also discontinued to make way for the new AMC Javelin pony car.

Styling changes were minor. Taillights were now recessed in body-color bezels that were divided by a single central horizontal bar. Front headlight bezels were similarly body colored. The grille was dominated by a strong horizontal bar, while its outline had squared off edges, which wrapped forward into the inner headlight extensions. Fender-mounted marker lights were added at the front and rear as standard equipment, as the federal government had mandated their application (along with seat belts beginning 1 January 1968) to all passenger cars sold in America for 1968. However, AMC's most enduring styling feature also debuted on the Ambassador for 1968, as flush-mounted paddle-style door handles replaced the former push-button units on all American Motors cars, save the Rambler American. At midyear, AMC's new top mill, the AMX 390 cu in (6.4 L) (315/325 hp) V8 became an option in the Ambassador line, bringing the total of engine options up to four.

American Motors started a new advertising campaign created by Wells, Rich, and Greene, Inc., that stressed each cars' value for the money and attempted to bring AMC back to their practical-car roots in customers' minds. It worked, and sales improved for AMC's flagship.

1969-1973

1969

Seventh generation



Production 1969-1973

Body style(s)

4-door sedan
4-door station wagon
2-door coupe

Engine(s)

232 cu in (3.8 L) I6
258 cu in (4.2 L) I6
290 cu in (4.8 L) V8
304 cu in (5.0 L) V8
343 cu in (5.6 L) V8
360 cu in (5.9 L) V8
390 cu in (6.4 L) V8
401 cu in (6.6 L) V8

Wheelbase 122 in (3,099 mm)

1969 Ambassador Royale Stretch Limo by Armbruster/Stageway

In 1969, the Ambassador received a major restyling, with a longer 122-inch (3,099 mm) wheelbase, the longest ever produced by AMC. The front end appearance was revised with new quad headlight clusters mounted horizontally in a new molded plastic grille. The grille itself is a blackout affair with a chrome horizontal bar that connected the headlight clusters. The hood was redesigned to accommodate the grille's raised center portion, and it faintly recalled Packard's classic grille/hood combination. Richard A. Teague, AMC's Vice President of Styling, had worked at the luxury car manufacturer before joining AMC. Parking lights were rectangular and mounted horizontally in recessed wells in the front bumper, just beneath each set of headlights. The entire front fascia leaned forward slightly to lend an air of forward motion to the car's appearance.

At the rear, ribbed rectangular taillights were mounted inboard the Ambassadors rearward-thrusting rear fenders. Square ribbed marker lights of similar height were mounted at the trailing edge of each fender side. The deck lid had a slightly higher lift over. The base and DPL sedan and hardtop models had no decorative panel connecting the taillights while the top-line SST versions featured a panel painted red to match the taillights. Station wagons saw vertical wraparound taillights replacing the previous "hooded" units, which were not visible from the side.

The interiors were upgraded and a new deeply hooded dashboard clustered instruments and controls in front of the driver.

The 1969 Ambassador stressed luxury, with the marketing tagline "It will remind you of the days when money really bought something." The combination of rich velour upholstery, individually adjustable reclining seats, standard air conditioning, and the longer wheelbase were highlighted in advertisements with Ambassador's posh "limousine" ride at an economical price. One aspect of this new advertising theme included many AMC dealers inviting prospective customers to call and request a "demonstration ride", in which a uniformed chauffeur would arrive at the prospect's home and drive them around in an Ambassador SST sedan. AMC's efforts worked, and Ambassador sales shot up again.

Not only did AMC promote the 1969 Ambassador as having a "limousine" ride and deluxe appointments, but Chicago auto leasing executive, Robert Estes, had the Armbruster/Stageway Company convert Ambassadors into real 24-foot (7.3 m) limousines. Known as the Royale Stretch Limo, one was owned by the State of Wisconsin as the official vehicle for Governor Warren Knowles. The conversions were unusual in that they did not keep the stock rear doors — as is typical in most limos. The back doors were welded shut and the Ambassadors were lengthened by inserting a section just behind the original B-pillar that had an entirely new central door in this center making a large opening for entry and egress.

1970

For 1970, the rear half of hardtop coupes and sedans was treated to an overhaul to mirror its intermediate 1970 Rebel's tail. On hardtop coupes, this restyling resulted in a sloping roofline that saw upswept reverse-angle quarter windows. The belt line kicked up at the point the hardtop's rear windows swept upward, and tapered back to the fender end, meeting a new loop-type rear bumper.

On sedans, the roof line showed a slimmer C pillar, squared-off rear door windows, and met a belt line that kicked up beneath the trailing edge of each rear door window. The belt line tapered back to the same rear fascia as the hardtop coupe's. This rear fascia contained a new ribbed taillight lens that stretched wall-to-wall and included twin square white reverse light lenses in its center.

Station wagons received no change to their rooflines, doors, and rear fascias. However, all Ambassadors received a new metal grille at the front, showing several widely-spaced bright horizontal bars with one wide, body colored horizontal grille bar extending to each headlight cluster. The 290 cu in (4.8 L) V8 was replaced for 1970 by a new 304 cu in (5 L) V8. The 343 cu in (5.6 L) V8 was also supplanted by a 360 cu in (5.9 L) V8.

1971

1971 Ambassador hardtop with TurboCast II wheels from 1979-83

1971 Ambassador station wagon

Following the previous year's redesign, the 1971 Ambassadors received only minor changes and improvements. The marketing tag line for the year was the underdog asking "if you had to compete with GM, Ford and Chrysler, what would you do?" — that was answered by AMC including more features, advantages, and benefits for buyers of its cars compared to the models from its much larger competitors. This was reflected by shuffling the Ambassador models for 1971 and by including more equipment in the standard feature list. The previously nameless base models were dropped, as the sedan-only DPL trim line was relegated to base model status, and a new top-line Brougham trim line was added above mid-line SST models. Both SST and Brougham models came as hardtop coupes, sedans, and wagons.

The DPL came with AMC's new 258 cu in (4.2 L) 150 horsepower (112 kW) Inline-6 with seven main bearings. All the SSTs and Broughams featured the 304 cu in (5 L) V8 with 210 hp (157 kW) as standard. The "Shift-Command" automatic transmissions was standard equipment across the line. Two of AMC's 360 cu in (5.9 L) were optional; a 8.5:1 compression version with a two-barrel carburetor or a high-compression four-barrel V8 that required premium-fuel. The previous "AMX 390" V8 gave way to a new 401cu in (6.6 L) 335 hp (250 kW) V8 as the top engine option.

Styling changes consisted of a new fascia up front. It featured headlights contained in their own chrome pods separate from, but flanking the new grille with a bright rectangular surround, with rounded edges. The "natural" cast pot metal grille insert was recessed and featured a bright vertical bar pattern. A second set of parking lights was added outboard of the headlight clusters, and they were integrated into the fender extension to eliminate the need for separate front marker lights.

Taillights on hardtop coupes and sedans still ran wall-to-wall, but the twin backup lights were moved from the center to further outboard — approximately eight inches in from either fender side. Once again, the wagon received few changes at the rear, but added a new design for its optional woodgrain side trim, which filled in its upper bodysides. Its lower edge flowed downward aft of its peak at the leading edge above each front wheelhouse, in similar fashion to the Buick Skylark's side "sweepspear" styling cue.

Ambassador base models were offered to fleet buyers with various police, taxicab, and other heavy-duty packages. Governments and police departments in the U.S. historically used standard-size, low-price line four-door sedans. Equipped with the 360 or 401 engines, the base Ambassadors saw use as police cruisers or support vehicles.

1972

Minor changes greeted 1972 Ambassadors, as AMC's biggest news for the year was the addition of the AMC Buyer Protection Plan warranty, which included the industry's first 12 month/12,000-mile bumper-to-bumper warranty as standard equipment on every model in the range. Mechanical features were upgraded in each model to increase durability and quality, the most notable of which was the standardization of electric windshield wipers, replacing AMC's ancient vacuum-powered units.

The base DPL was canceled, as well as six-cylinder engine availability. The Ambassador became a V8-only car for the first time since 1964. This made the Ambassador the only volume-produced American car with air conditioning, an automatic transmission and a V8 engine all as standard equipment, all while being priced less than the Big Three's full-sized cars. Ambassadors were now available in SST and Brougham trim only. Styling changes were limited to a new crosshatch grille at the front.

1973

The SST models were dropped from the line, as all Ambassadors now came in one high-level Brougham trim. An AM radio and tinted glass were added to the extensive standard equipment list. Heftier front and rear bumpers were included to comply with new government regulations that required all passenger cars to withstand a 5-mile-per-hour (8 km/h) front and a 2.5-mile-per-hour (4 km/h) rear impact without damage to the engine, lights, and safety equipment.

Ambassadors complied with the regulation by incorporating a front bumper equipped with shock-absorbers. It jutted slightly forward from the front fascia and incorporated flexible trim matching the body paint. This bumper also featured a more prominent horizontal rubber guard at its upper portion near the grille, thus eliminating the need for a pair of vertical chrome bumper guards that was optional before. The rear bumper gained vertical black rubber bumper guards that also replaced a pair of similar and previously optional chrome bumper guards. The grille gained heavier horizontal bars and headlight bezels took on blackout trim in their recessed portions.

1974

Eighth generation



Production 1974

Class

Full-size car

Body style(s)

4-door sedan
4-door station wagon

Engine(s)

304 cu in (5.0 L) V8
360 cu in (5.9 L) V8
401 cu in (6.6 L) V8

Transmission(s) 3-speed automatic

Wheelbase 122 in (3,099 mm)

Length 217.8 in (5,532 mm)

Fuel capacity

20.5 US gal (78 L; 17 imp gal) (sedan)
17.5 US gal (66 L; 15 imp gal) (Wagon)

Ambassador sales had remained steady since 1970, despite the lack of major changes to the vehicle. However, the 1974 model year would bring out the biggest Ambassador —just as the 1973 Arab Oil Embargo sparked gasoline rationing across the nation. The Ambassador sedan was stretched seven inches (178 mm) compared with the 1973 versions. This additional length was due to a new front end design and energy absorbing bumpers.

The 1974 Ambassador Brougham was no longer available as a 2-door hardtop, leaving just the sedan and wagon in the line. The hardtop's cancellation was due in part to low sales volume, as well as the introduction of a sleek, sporty new Matador coupe. It was probably not seen as suitable for AMC to build a formal-styled Ambassador version from the same platform.

Styling changes for the sedan and wagon included new front fender caps on the same fenders as used since 1969, and hood, grille, bumpers, rear fascia, instrument panel, interior trim, hood ornament, and a new font for the Ambassador nameplate. The grille showed off a new squared-off loop-type design surrounding the circular recessed quad headlights, and featured a forward-protruding center. The insert held a crosshatch pattern dominated by two thick horizontal bars that connected the headlight bezels and contained new parking lights between them. These parking lights had amber lenses, followed the grille protrusion forward, and were overlaid by the grille's crosshatch trim. Headlamp bezels were once again blacked out in their recessed areas. The new hood and front bumper followed the grille's central protrusion forward, giving the car a slight "coffin nose" look. The contemporary Matador saw a similar frontal treatment, but with a much more pronounced effect and with different single headlamp clusters, hood, and grille insert.

At the rear, the new bumper was much larger and backed by shock absorbers, as it was beefed up to comply with new National Highway Traffic Safety Administration regulations for standardized front and rear bumpers on passenger cars that could sustain a 5-mile-per-hour (8 km/h) impact with no damage. Fiberglass end caps were added to the ends of each rear fender on sedans. They wrapped inward to create a recessed space that met a carryover decklid. In this space was mounted the new rectangular taillight housings, which featured taller white backup lights mounted inboard of the new taillights. The license plate moved from the rear bumper to the area between the new taillight assemblies, and the whole taillight and license plate system on the sedans was surrounded its own loop of chrome trim.

The cargo area and the rear design of station wagons remained similar to previous Ambassadors, save for a massive new bumper and revised taillamps. The wagon was available with two-row bench seats for six passengers or with a rear-facing third row for a total eight seat-belted passengers. All came with numerous practical, appearance, and comfort items as standard. These included a two-way opening tail gate: (1) hinged at the bottom for convenient loading or hauling long cargo and (2) hinged at the side to open as door for ease of entry and exit for passengers or cargo; wood grained semi-transparent vinyl side and rear trim, a full-length roof rack; as well as a chrome and wood grain roof air deflector to help keep the tailgate window clean.

Powertrain selections remained the same with only V8 engines mated to automatic transmissions. Other increases for 1974 included a larger capacity fuel tank, 20.5 US gal (78 L; 17 imp gal), and an alternator producing 62 amps. New sound insulation made the Ambassador even quieter. All came with a very lengthy list of standard equipment that was typically optional on competing makes. These included comfort items such as air conditioning and vanity mirror to appearance enhancements such as pin striping and whitewall tires.

Sales of all full-size vehicles, regardless of the automaker, fell significantly in 1974 as America's focus shifted to smaller cars. Ambassador sales were no different, and in June 1974, the final AMC Ambassador rolled off the Kenosha, Wisconsin assembly line, ending a nameplate that had been in continuous production in some form for 48 years.

Epilogue

Because AMC was focusing its attentions on their newly acquired Jeep line, the redesigned Matador coupe, and the AMC Pacer, which would debut in 1975, the company would not put forth the money to give the full-size Ambassador, and its Matador sedan and wagon counterparts, a new lease on life after 1974. Much of the car's tooling had been around since the 1967 model year, and rather than invest in what appeared to be a declining market, AMC decided to spend its money on smaller cars and sport-utility vehicles.

However, the Ambassador lived on in spirit as that similarly sized and styled Matador became available in uplevel "Brougham" trim from 1975-76, and unique Barcelona trim in its final year, 1978.

1974-1978 AMC Matador

American Motors put a simple question before car buyers in the early 1970s: What's a Matador? But AMC's product planners thought they already knew the answer. To them, the 1974-1978 AMC Matador was just the thing to contend with the bull market for plush mid-size coupes that sprang up after the end of the muscle car era.

AMC gave its stodgy, slow-selling Matador two-door a distinctive makeover. The bug-eyed fastback that resulted made its debut in 1974.

A respected automobile magazine publisher, commenting about American Motors's mid-1970s Matador coupe, sagely noted, "It didn't look like an AMC car -- it looked like it came from GM."

He meant it as a compliment. It recalls, too, the opinions that were held at the time by both AMC and the automotive press: This was something that was truly different and exciting. When it debuted, initial responses to the bold design indicated the coupe might become one of the hottest AMC cars ever. For a while, the press and the public loved it.

The program to redesign the Matador for 1974 represented a new direction for American Motors. Gerald C. Meyers, vice president of product development, had his product planners at work on ideas for a revamped mid-sized product.

The original Matador line, introduced in 1971 to replace the Rebel series, consisted of a staid four door sedan, a station wagon, and an uninspired two-door hardtop. The sedans and wagons offered excellent value and were fairly popular. The problem seemed to be with the two-door models; hardtops generally appealed to people looking for exciting styling and in that regard the Matador just wasn't up to the job.

Company studies indicated the best opportunity for increased sales volume lay in designing a new two-door Matador to appeal to buyers looking for sporty styling. There was plenty of evidence to support this conclusion in the rest of the industry as well. Intermediates were outpacing the market. The new-for-1970 Chevrolet Monte Carlo was an exceptionally hot-selling car; so were Pontiac's LeMans, Oldsmobile's Cutlass, and Ford's Torino. The glamour stars of the mid-size market were all hardtops or coupes, with styling as their greatest selling point.

The task of redesigning the Matador went to AMC Styling, under the direction of VP Richard Teague. His staff was allowed more freedom than usual because of a decision to allow the new Matador to be designed strictly as a coupe. Free of the constraints of trying to produce sedan and station wagon variations with the same lines, the designers would be able to style their coupe as rakishly as sheetmetal could be made to look.

1974 AMC Matador

Introduced in the fall of 1973, the 1974 AMC Matador coupe combined the shock of the new with some familiar details. It was a 1970s-style fastback, with a low roofline, close-coupled cabin, and a long, long hood. Exterior design was the work of a team headed by Robert Nixon, director of passenger car exterior styling, while interior design was handled by stylist Vince Geraci and his staff.

The Matador sedan looked shockingly different than the new coupe.

If the idea was to come up with a look that was all-new and visually striking, they did their work well, as evidenced by the cover of the November 1973 issue of Car and Driver magazine, which featured a flaming red Matador coupe that Car and Driver boldly pronounced "1974's Best Styled Car."

Probably the most distinctive styling element was up front. The sloping hood was capped by deeply tunneled headlamps that served as the focal points of the frontal styling. The inset grille was deliberately understated, but featured turn signal lamps styled to resemble driving lamps.

The forward edge of the hood was the starting point of a crease that ran completely around the middle of the car. Two sets of round dual taillights peeked out from under the fold at the rear. The wide doors carried frameless door glass, but the triangular rear quarter windows were fixed behind a thick B-pillar.

It was an effect much like that used by General Motors's new-for-1973 intermediate coupes, although with more of a fastback roofline than seen on the General's mid-size two-doors.

The headlamps recalled the 1964-1965 Rambler American and for good reason -- Nixon worked on both designs. Their selection was a deliberate effort to reflect the earlier design. "We wanted to keep some family resemblance and do it in a mid-size [car]," he said. Nixon pointed out that the rounded headlamp theme was carried over to the taillights as well.

It has long been rumored that the coupe's fastback roof styling was a deliberate attempt to enhance its race track potential, and that racer Mark Donohue (famous for campaigning Trans-Am series Javelins) helped design the car, but Nixon said there was no substance to those notions. "Racing was never a major design issue .... We did talk to Mark Donahue from time to time, but I don't believe it had anything to do with the Matador. We were doing some show cars [the AMX 3] and we talked to him on that."

A very unique and innovative feature debuted that year on the Matador coupe -- AMC's free-standing bumpers. Stringent new federal bumper regulations forced automakers to increase the size of bumpers and place them further away from the body. The gap between body and bumper was usually filled with a plastic "sight panel" that, in combination with the large bumpers, gave many cars a nose-heavy look.

AMC solved the problem by eliminating the filler panels that normally spanned the space between body and bumpers, instead covering just the retracting pistons that located the bumpers to the car. Although it sounds like a simple concept, in 1974 it was considered audacious.

1974 AMC Matador Lineup

The 1974 AMC Matador lineup was simple. The Coupe came in three models: base, sportier X, and ritzier Brougham. The standard model was equipped the way most mid-size American cars were back then -- pretty basic. Included was AMC's reliable 232-cubic-inch six-cylinder engine, a three-speed manual transmission, bench seats, color-matched carpeting, cigarette lighter, dual horns, and a 24.9-gallon fuel tank.

The 1974 Matador X, with its slotted wheels and racing stripe, kept up the pretense of sport.

The Matador X came with rally side stripes, blacked-out grille, slotted wheels, sports steering wheel, a 304-cubic-inch V-8 engine, and "Torque Command" automatic transmission.

Brougham models added fancier trim, bright rocker panel and wheel opening moldings, a hood stripe, full wheel covers, a two-spoke steering wheel with woodgrain appliques, custom door trim panels, and nicer seat upholstery but carried the 232 six as standard equipment. This was the first year of the dratted federally mandated ignition interlock that forced front seat occupants to fasten seat belts before the ignition would operate, so that, too, was standard equipment.

AMC was famous in the 1970s for its use of designer-label interiors like the Gucci interior trim offered on the Hornet Sportabout wagon, "LEVI'S" denim-look seating on Gremlins and Hornet hatchbacks, and the outlandish Cardin trim offered on Javelins. For the Matador coupe, AMC settled on a combination of luxury interior trim matched with fancy exterior highlights marketed as the Oleg Cassini Package.

The package, available only on the Brougham, included individual reclining seats with black trim, copper buttons and Cassini's crest on the head restraints, a black headliner, a black instrument panel with copper dials and overlays, plus Cassini identification on the glove box door, a black steering wheel with copper accents, handsome copper carpeting, a copper-colored grille and headlamp bezels, a vinyl roof, scuff moldings, and special wheel covers with copper accents. According to several AMC executives, most of the Cassini package's elements were designed by AMC stylists, with little real input from Cassini.

In January of 1974, an opera window treatment, dubbed the D/L Formal Window Package, became available on Broughams. An AMC stylist remembered, "That was Dick Teague's request -- he loved things like that."

The coupe's underpinnings were nicely done. The 114-inch wheelbase (now four inches shorter than the stretch under the face-lifted carryover sedans and wagons) boasted four-wheel coil springs, twin ball-joint front suspension, and a front sway bar as standard equipment.

The body/chassis was unitized, naturally, like all AMC cars had been for many years. An Extra Quiet Insulation Package was standard on all models. Front disc brakes were standard, although power assist was available at extra cost.

The Matador offered a lot of powertrain choices. Buyers who desired more spunk than the 100 horsepower provided by the 232 six could opt for a 258-cubic-inch six with 110 horsepower or a 150-horsepower 304-cid V-8. Additionally, two 360-cubic-inch V-8s were offered: a two-barrel job of 175 horsepower, and a four-barrel version packing 195 horsepower with single exhaust or 220 with dual exhausts. The big-motor option, however, was the 401-cubic-inch V-8, which came only with four-barrel carburetion and twin exhausts. It pumped out 235 horsepower at 4,600 rpm and 335 pound-feet of torque at 3,200 rpm.

Only two transmissions were available. The column-shifted three-speed manual came standard with the sixes and wasn't offered with the V-8s. A Chrysler-built three-speed fully automatic transmission was available with either a column- or floor-mounted shifter. The floor shift could be had only on V-8 coupes equipped with bucket seats and console.

1974 AMC Matador Advertising

American Motors rolled out an impressive 1974 AMC Matador advertising program to launch the new Matador coupe. To make sure the public understood this really was a new car, headlines blared "Newest Mid-Size For 1974." Copy stated, "This is one mid-size car you've never seen before. See why experts are already calling it America's sportiest new car."

The sporty 1974 Matador had an undeniably unique look, a bonus for advertising.

In the previous year, an AMC advertising promotion had lampooned both the modest sales and relative anonymity of its mid-size models by posing the question "What's a Matador?" For 1974, American Motors answered its own question with color postcards of its glamorous new mid-size offering. "WHAT'S A MATADOR?" the card asked rhetorically "THIS IS!" AMC expected big things from its new car and production was cranked up accordingly.

Members of the motoring press swarmed to the Matador and for the most part they loved it. Car and Driver said, "There's an undeniable smugness stamped into the fenders of AMC's new Matador X. And each arrogant crease is integral to an overall air of confidence."

Of the Cassini version, Car and Driver stated, "You won't be able to miss it if you travel in high fashion circles. Nor will you pass by the Matador's shapely exterior without serious consideration. While it lacks the refinement of a Chevelle or a Torino from several standpoints, it is undoubtedly this year's style leader." Road & Track magazine felt the Matador was "Sleek & fast but oversize and thirsty."

The new coupe even made it to the race track, but had an inauspicious first year. Fielded by Roger Penske Racing, the Matador spent the year gradually working its way up through the NASCAR standings before Bobby Allison bagged the team's first win in the season finale at the Los Angeles Times 500 in Ontario, California.

Production of the 1974 Matador coupe totaled 62,269 (31,169 base coupes, 21,026 Brougham coupes -- including 6,165 in Cassini trim -- and 10,074 X coupes) for the model year, up sharply from the 7,067 Matador hardtops produced for 1973. This increase came despite a drop in the overall market for 1974. A production milestone was reached during the year when a Matador coupe became the six millionth car produced by AMC since its founding in 1954.

1975 and 1976 AMC Matador

AMC introduced its radically styled Pacer subcompact in 1975, so changes to the rest of its car lines were held to a minimum. The 1975 and 1976 AMC Matador coupe lineup was trimmed down to a single model, but the Brougham and X survived as option packages. The Cassini decor continued to be available, as well, tempting 1,817 buyers in 1975.

A 1975 Matador X like this one was technically an options package for the base model.

The advent of emissions-tempering catalytic converters sapped net horsepower and led to a shakeup in the 1975 Matador's engine roster. The 258-cubic-inch six with electronic ignition became standard equipment, except in California, where the 304-cubic-inch V-8 was the base engine. Respective power ratings fell to 95 and 120, however. Furthermore, the 401-cubic-inch V-8 option was dropped (though some reports claim that four coupes and a total of 85 sedans and wagons were built with the big engine).

Two 360-cubic-inch V-8s were still available; a 140-horsepower two-barrel version with single exhaust, and a four-barrel variant with dual exhaust rated at 180 horsepower. The Matador X's shift to appearance package status meant it could be had with the base six, but the two made for a rare combination. The three-speed manual transmission continued as the standard gearbox, though most Matadors were ordered with the optional automatic.

Fuel economy was still a concern months after the OPEC oil embargo ended, so easier-rolling steel-belted radial tires were fitted as standard equipment. Also, a fuel economy gauge became available.

During the 1975 NASCAR racing season Allison and the Matador coupe racked up additional victories at the season-opening Winston Western 500, the Rebel 500, and the Southern 500. But by season's end, AMC decided to discontinue factory support of the Matador racers. After one more start with the Matador in the 1976 Winston Western 500, the Penske-Allison effort switched to a Mercury.

It was a bad year for the auto industry, with sales affected by fuel scares and a business recession. Production of the 1975 Matador coupe sagged to 22,368 for the model year. AMC reported a $27.5 million loss.

For 1976, the Matador coupe received an interesting new grille consisting of two rectangular panels filled with horizontal grille bars and rectangular park/signal lamps. An inside hood release, previously optional, became standard equipment and the seat belt interlock system departed. Oddly enough, bias-ply rubber was standard again as radial tires returned to the option list.

The Brougham option, which included roll-down rear quarter windows, made its final bow for 1976.

The popular Brougham decor was still offered, but the X package was no longer available. However, buyers desiring a sportier looking coupe could order new 14x6 forged aluminum wheels, a rally stripe, bucket seats, and firmer suspension parts to make a Matador X in all but name.

Engines were retained from 1975, but the twin-exhaust, four-barrel 360 V-8 was in its last year. A more economy-minded 2.87:1 rear axle ratio came with all V-8s, but the previously standard 3.15:1 cogs could still be ordered.

There was no Cassini option for the 1976 coupes, but AMC Styling came up with a new trick, the Barcelona package. Matador Brougham coupes with this package were treated to lush individual reclining seats in tan or black Knap Knit fabric, thick carpeting with matching trim for the lower door panels, black or tan color-keyed wheel covers, a stand-up hood ornament, Barcelona nameplates for the hood and decklid, special medallions on the glove box and fenders, and a red-and-yellow bodyside stripe. If the tan interior was chosen, the grille, headlamp bezels, and rear license plate cove received tan accents.

AMC car sales dropped dramatically for 1976, Matador included, and the company suffered a loss of $46 million for the year.

1977 and 1978 AMC Matador

The 1977 and 1978 AMC Matador underwent only minor changes. When the 1977 AMC cars debuted October 11, 1976, they had a new slogan: "THERE'S MORE TO AN AMC!" The 1977 Matador coupe didn't offer many styling changes despite being in its fourth year of production, but its standard equipment list was greatly enhanced. Automatic transmission, power steering, power disc brakes, full wheel covers, and individual reclining seats were now included on every Matador.

Aluminum wheels and a vinyl roof were among the options for the 1977 Matador.

The 258-cubic-inch six continued as the base engine in most states, but it picked up three brake horsepower to 98. The 304-cubic-inch V-8 got a boost to 126 horsepower, but the lone 360-cubic-inch offering dropped 11 horsepower to 129.

The big story for 1977 was a new appearance package dubbed Barcelona II. This Brougham replacement provided what AMC termed "Distinctive fine car luxury." Included was two-tone paint in either Golden Ginger Metallic on Sand Tan or Autumn Red Metallic on Claret Metallic; a landau-type padded vinyl roof; opera quarter windows with special accents; body-color bumpers with black bumper guards and protective strips.

A padded opera window roof was added as part of the 1978 Barcelona package.

Also included in the Barcelona II were dual body-color remote mirrors; accent color around the headlamps; slotted wheels (in body color); GR78X 15 whitewall radial tires; Knap Knit upholstered seats; and a Barcelona hood ornament, insignias, and medallions. But AMC car sales were in a slump even the Barcelona II couldn't lift. Matador coupe production sank to just 6,825 for the model year.

The 1977 Matador made a surprise return to the NASCAR racing circuit. Allison and Penske parted company after the 1976 season, and for 1977, the veteran driver chose to strike out on his own. He talked American Motors into providing factory support, rounded up some banking industry sponsors, and returned the red, white, and blue Matador livery to the speedways.

Allison managed five top-five finishes in the 30 races on the schedule, but could do no better than a second in the short-track Nashville 400 in July -- and only then as the result of a scoring review several days after the race that moved him up from third. The following season Allison was in a Ford and AMC's fling with stock car racing was finally at an end.

In 1978, AMC was preoccupied with launching the "new" Concord compact (really a reworked Hornet), its latest attempt at reviving the company's passenger-car business. There wasn't much interest in the mid-size line and thus there wasn't too much that was new.

The 1978 Barcelona package became more elaborate with new color-keyed bumpers and slotted wheels.

The popular Barcelona package returned -- minus the "II" designation. (For 1978, package availability was even extended to Matador sedans.) Drivetrain choices were trimmed, however. The 258-cubic-inch six with automatic remained standard, but the 360-cubic-inch became the only V-8 option.

The engines did get beefier, though. The six was puffed up to 120 horsepower and the V-8 was restored to its 140-horsepower rating of 1975-1976. Torque was up, too, especially in the V-8, which went from 245 pound-feet at 1,600 rpm in 1977 to 278 pound-feet at 2,000 rpm for 1978.

American Motors was clearly shifting its priorities to compact and smaller cars, and most of its dealers knew the Matador was at the end of its run. Production for this final year was a mere 2,006 coupes, slightly more than one per AMC dealer.

By mid-1978 AMC had reached an agreement with Renault to market the French company's line of small cars in America. The agreement eventually led to Renault taking over AMC, but that was still in the future. At the end of the 1978 model year, American Motors abandoned the intermediate market and the Matador coupe became a part of AMC's past.

Friday, May 8, 2009

Pickles